Search results
-
T
265 65 18 Goodyear Wrangler Duratrac
Since 265 60 18 are on the national Back Order , I would like to weight my options , regarding going a size up to 265 65 18. As I always had two sets of tires , one for off road and one street oriented ,the Duratrac won't be my daily driver tire .I also don't wear any lifts, electronic and... -
T
Gauging interest in Anitas EAS control unit.
I recently contacted MUDTECH 4x4 in terms of getting my hands on 17 " RACER wheels , that would fit over our V8 brake calipers without any modification and spacers.As their company recently moved out of Italy , to Germany with production line of everything they sell for Discos , and they sell a... -
T
Gauging interest in Anitas EAS control unit.
I recently contacted MUDTECH 4x4 in terms of getting my hands on 17 " RACER wheels , that would fit over our V8 brake calipers without any modification and spacers.As their company recently moved out of Italy , to Germany with production line of everything they sell for Discos , and they sell a... -
T
This will be expensive I think, AC leaks
Hi guys . Yesterday , while doing routine engine and front diff oil change, I discovered something nasty. Every time my LR3 is on the jack stands , I try to look everywhere for irregularities and potential problems by gliding under the car with a flashlight and poke things around.As I was... -
T
Side mirror loose
Is possible to retrofit a folding side mirrors? Mine are heated ,W/memory , but to fold it i have to push the in and they do 't go all the way in anyway.. My LR3 has just been in a car wash the other day and they must have pushed it to hard or tried to hard as the whole upper casing is... -
T
rear halfshaft squeak
Hi gang. I have noticed a couple days a go, that ,when I select REVERSE something is squeaking on rear passenger side of my LR3.At first I thought, that it may be a park brake shoe touching something in the rotor, since I replace them a couple months a go, but today, I let my wife jump behind... -
T
BG INJECTION,induction service engine fault codes
Hey gang. After some encouragement from some forum members, about BG induction/injection service, I went ahead and requested it , from a local shop, that is certified by BG company , to perform this operation, among many others. Picked up my car a few hours later with CEL.Well, took out my... -
T
where is this goes?
While removing interstate battery for charging , I discovered this hanging wire loom with connector.I think it should go into quick connect tied to another loom on the right hand side of the picture.I am not sure if I have to..it might be for something that is related to European specific... -
T
interstate battery upgrade
Hi team I flattened my interstate battery yesterday by accident and while charging it back to normal state in my garage, I was wondering if anyone has gone up with a size meaning more then 720 CCA ,I know that size wise it is not much room left in battery compartment if anyone wants to... -
T
Cargo barrier
Hi Team. I recently put a bid on local craigslist on OEM set : cargo barrier and pet divider .Guy wanted 500, i offered 400 and obviously lost it to someone that shelled out full amount, still a good price , I guess.Original piece looks solid and solid is what I am after, since we just... -
T
Have you seen this vid?
This is the guy , that puts many of us to shame now...impressive.... YouTube - CORE LR3 MUD test. V8 -
T
hood release cable broken
Hi to you all I tried to open a bonnet this morning for some service,but to my surprise:biggrin:The release mechanism does not make any sounds.I checked the release handle , by the driver's door for a dis attached cable,but is all fine THERE,which means probably that cable is broken somewhere... -
T
Kayaks limit
:hello:Guys...I am trying to pull a trigger on two or even three kayaks in the very near future(2-3 months) and don't really know , how long they can be to be able to sit on roof rack,preferably Yakima set from AB,but i am open for suggestions,without securing them in front and back with ropes... -
T
Anybody from New Orleans?
Hi , Guys I have posted this question on another forum,but i will give it a shot here. My boss has won a bid for renovation on one of the buildings in French Quarters and I have to come down there for a couple of months and supervise it.It is a long trip from NJ and I wont be going back home... -
T
switching to Synthetic
What do you guys think about switching to synthetic engine oil on 4.4 V8?Somehow i hear that our jag engine was specifically designed for conventional oil,therefore it does not require any others as longest is changed to specifications.I am actually at 75.000 miles and wanted to know your... -
T
dakar 2008
I though I will post this video,it brings back good memories and hope that they might actually finish this brutal race.Sadly their engine failed on one of the African long desert stretches .Now, that a DAKAR rally is hold in Argentina and CHILE ,they face bigger challenges than ever with high... -
T
silent armor dissapointment
Hi,guys. I am on the fence with these tires, GW silent armors that is.At first there where great, big improvement over OEM wranglers I must say,but now after 30.000 miles driven they seem to act very strangely.There is a constant shake, especially at high speeds and with cold flat spots in... -
T
Battery booster needed
Hi,guys Can somebody point me in the right direction,please, i need to purchase a good quality battery booster with charging mode up to 14.7 V, but also most importantly with a SUPPLY MODE 13.5V. I recently bought a Foultmate MSV 2 from BBS and while performing a 15 min. diagnostics with... -
T
RS sliders help
Hi to you all. I recently purchased a opt.2 RS sliders .After reading all the instructions I proceeded with installation.took me 3 hours as previously posted.I was very proud with my job and began to ride across NJ to show my new pride and joy.I might be the only guy with these sliders,but... -
T
magnaflow exhaust ?
It has been discussed a while a go when magnaflow was about to realize a performance exhaust for LR3.My OEM mufflers and pipes are due for replacement,pretty banged up ,one end crashed actually,although it was previously straitened up,did not lasted long and broke while recent off road... -
T
Termostat help
Hi,guys. I have a question: How easy or hard is to replace a thermostat? Does it involve draining a coolant or should I depressurize a system ?I know ,someone from this forum did that long time a go and it suppose to be an easy job. I also would like to change or clean MAF sensor,but not... -
T
Sliders opt 2 slims
Hi to you all. I recently purchased Sliders opt.2 slims from rover specialties.took me 3 hours to install with two coffee breaks and all the prep work needed,new jack assembly,new stands ,four 4x4 s cut to two feet long pieces(two wrapped in fabric to prevent scratching) ,understanding... -
T
Sliders instalation help
Hi guys.I finally purchased Mantec under bumper plate and have it installed today.Another item is in making for me,Sliders opt.2 slims with typical waiting time of 2-3 weeks ,but that's okay I am glad that I ordered them.Yeah!.My plans are to install sliders myself , are you guys have any tips... -
T
Rasta T-case guard
Hi to you all. I tried to ordered a t-case protection plate from atlantic british which is I think made by rasts4x4 ,but is almost 600 dollars,so i looked around and came across british pacific website that sells gearbox-t-case guard for 411.00.Are they both the same protection plates,I assume...
