Search results

  1. JDiehl

    Horrible rattle from sunroof area

    Same here. Drives me crazy. It stops when I put pressure on the glass. Would like a definitive repair solution that doesn’t replace the whole assembly costing way too much…. But might be worth it.
  2. JDiehl

    Seeking LR4 inline thermostat and crossover pipe Beta Testers

    Waiting patiently for updates and watching this thread! JD
  3. JDiehl

    2014 Evoque

    Update Reset the battery management all issues have not returned. JD
  4. JDiehl

    2013 Evoque No start, multiple errors

    Did you try resetting the battery management system?
  5. JDiehl

    2014 Evoque

    Well, running into a few issues with the wife's Evoque. These are the codes that popped with the IIDtool. She was driving and the car would not accelerate until it was restarted and then drove normally. The start/stop battery has been dead for sometime which is fine by me because a hot turbo...
  6. JDiehl

    Protection bar fitting

    Ended up running the bolts backwards through the brackets and dabbed some white paint on the ends of the bolts. This allowed me to set the plastic bumper surround on and it marked my drill holes on the back side. The template was not ideal for me. I’ll throw a pic up when the job is finished. JD
  7. JDiehl

    Protection bar fitting

    Before I drill this anyone have experience fitting the VPLAP0022 protection bar? There are two patterns. I’m guessing one for LR3 and other for LR4 as they are a little different and call for different bit sizes when drilling. I know the bar is basically just for looks. Had it painted...
  8. JDiehl

    What kind of leak is this?

    I second the rear crossover.
  9. JDiehl

    Compressor running

    Replacement of the rear valve block did the trick! Back in business. Looks like it was leaking at the voss connection on the VB that was feeding the passenger side air bag. The new valve block was an easy install with the brass fitting stripped from the line. The air lines just push into the...
  10. JDiehl

    Compressor running

    Ok finally got around to getting parts ordered up. Went with a new rear valve block from lucky8 and new Arnott rear strut assemblies from FCP. Pretty sure the passenger side rear bag was leaking along with the rear valve block internally as the truck was snagging on the passenger side and...
  11. JDiehl

    Compressor running

    The front and central valve blocks were serviced with new o rings. There was quite a lot of desiccant dust build up. Still need to do the rear. My gallery pressure is building into the 170’s psi range. What should it be? It’s probably the compressor. Who knows has a good source on the oem...
  12. JDiehl

    Compressor running

    I might pull the compressor back off and double check that I didn’t twist up the delivery valve spring when I stalled the new one from the kit. The LR hasn’t been driven in a few days. I left it in off road height with zero sagging from the suspension. JD
  13. JDiehl

    Compressor running

    Switching back to the old relay stopped it running every few minuets but it did throw a C1A20-64. Pressure increases too slow when filling reservoir. I took it for a spin and went to all height levels a few times. It auto leveled at the gas pump and the compressor ran like normal upon start...
  14. JDiehl

    Compressor running

    I need to check the front air block still. Tomorrow I will recheck and change back to the old relay and see what happens. JD
  15. JDiehl

    Compressor running

    Rebuilt my Hitachi compressor and mounted it back up today. The desiccant was white had not turned into a rock or broken apart into dust yet. Pretty sure this is the first time its been serviced at 107K. There were no suspension issues prior but I wanted to change the desiccant and it snowballed...
  16. JDiehl

    LR4 Transmission Fluid Change: Pan Swap Option

    Also, picked up this aluminum bridge adapter from SFC motor sports. I’m still up in the air about using it. Just wondering if the aluminum will hold more heat and degrade the seal. Eyeball is identical to the ZF.
  17. JDiehl

    LR4 Transmission Fluid Change: Pan Swap Option

    On my pan from FCP the smaller plug will get more of a drain.
  18. JDiehl

    LR4 Transmission Fluid Change: Pan Swap Option

    All my parts have come in for a pan and VB refresh but at what point does the adaptation need reset? Before cracking it open or after the filling process? JD
  19. JDiehl

    2016 LR4 SCV6 - Block heater, now with video of location.

    I will have to crawl under mine and take a peek. Do you have a part number for the cord?
  20. JDiehl

    Good Ole Girl

    Check out blackdecal.com out of Australia.
  21. JDiehl

    Thumping when Reversing after car has been parked overnight

    My rover makes the same thumping noise in the morning when backing down the driveway. This is the only time that the noise is made. I have drilled and slotted rotors with good pads. I always chalked it up to rust build up overnight. Anyway I can live with it. It is better than the trash truck...
  22. JDiehl

    Where to buy a SIDE MIRROR backing?

    Check out powerfuluk.com.They might have what your looking for.
  23. JDiehl

    2015 land rover Evoque

    I would check the warranty book provided when you purchased the vehicle. Is your RR still under factory warranty coverage by the in service date? its sure under millage wise. I never had any issues with the sensors on my 2014 evoque. Or call another LR dealer and check with them. JD
  24. JDiehl

    Where are the Evoque owners?

    So where is the active Evoque forum on the net these days?
  25. JDiehl

    Silver Letters and Trim go Black

    The lettering on my wife’s RR has also done the same but just on the front of the hood. I’ll probably go with all back lettering some day soon.

Latest posts

Members online

Forum statistics

Threads
36,222
Posts
217,567
Members
30,473
Latest member
OnoA
Top