Search results

  1. S

    Rear hub removal help

    I know this will sound simplistic, but were you pushing your brake in while trying to shift into gear?
  2. S

    Rear hub removal help

    I would say take a hammer and tap the backside of the rotor. Not too hard at first and rotate the rotor as you tap it. Stripe Still need model year though to really be able to help..
  3. S

    Rear hub removal help

    Ahh, the huge phillips screw, My Arch Nemesis. I had to buy a new, what I call, fathead philips head screwdriver. :hmpf: What year Disco do you have?
  4. S

    Crank Shaft Position Sensor installed - STARTS GOOD

    I just did this last night and the the trick I used, after first removing the cover and then pulling the sensor our, to remove the connector from the bracket was to use a 1.5 foot angled pry bar and a screwdriver of the same length. The pry bar has a 1 inch length flat tip that is at an angle...
  5. S

    2000 LR D2 Starting Issues

    So, I replaced the CPS and so far so good. NO stall-outs and have been able to restart after driving. Did a 2, 5 then 10 mile drive about and no problems. Will post pics and description of work done in a new topic if one doesn't already exist. Stripe
  6. S

    2000 LR D2 Starting Issues

    Thanks for reminding me, I forgot to say I had my comp checked and it returned NO error codes. I thought, how could that be? I have the Three amigos that I never cleared. I asked the guy if there was a chance the unit he used was broke and he said no. I got a CPS last night from autozone and...
  7. S

    Flat towing 99 Land Rover

    Flat Tow I flat tow a 2000 Land Rover DII behind my Motorhome. When I tow the Rover, I have the Transfer Case in Neutral and the Gear Selector Lever in Park. The Key does indeed need to be in the first position. I have had NO problems towing with this configuration. On a related note, if...
  8. S

    Intermittent engine start failure

    thanks thanks for the reply. I'll let you know if that helps me as well. On a unrelated note, anyone know why my response double posted? Stripe
  9. S

    Intermittent engine start failure

    cps RhewJ, Has the sensor replacement fixed the problem? I'm sort of in the same boat, only mine died whilst driving her. And like you mine didn't even throw out ANY codes. Stripe
  10. S

    Intermittent engine start failure

    RhewJ, Has the sensor replacement fixed the problem? I'm sort of in the same boat, only mine died whilst driving her. And like you mine didn't even throw out ANY codes. Stripe
  11. S

    2000 LR D2 Starting Issues

    2000 LAnd Rover Discovery II just short of 200k Miles. Was driving one day when engine just quit. No warning. Tried starting again but no go. I was able to push it to a parking spot to try and troubleshoot the problem. I tried everything I could think of. Checked all the fuses and I...

Members online

Forum statistics

Threads
36,256
Posts
217,955
Members
30,493
Latest member
A562NV
Top