Search results
-
Coolant Crossover Pipe Repair 5.0 V8
When I did mine, I bought mine from Atlantic British.. Turned out to be a cheap knockoff, the quality (inside and out) was terrible. I could force it into place, but it didn't seem to seat correctly. Into the garbage it went, and I was off to the dealership. The OEM popped right into place... -
Aluminum crossovers exist now! (maybe)
Here's the rear for the TDV6: Dude's promising the 5.0L by the end of the year.. -
Fuel tank capacity- Sucks
Rover Range brings a good point that scares me: if I'm in the hills on a low tank, at what point do I risk running the pump dry and stalling? Almost happened to me on the Smoor Overlanding Rally, so I installed an Idiot buffer buffer! -
LR4 5.0 (2012) engine bay rattle when cold
PSU, Sounded pretty good to me.. I heard a couple of knocks that could have been your phone hitting something, but the valvetrain/injectors/fan clutch sounded ok.. Is it rhythmic with the engine? MP -
Wheels and Tires?
Are you running the SYA kit with these or is the suspension stock? I usually run about 1.5 inches above stock- OBDII adjustment for my taste/levelling the trailer. The folks who have done the geometry say that height has very little to to with the rub.. With this little lift and the new... -
Wheels and Tires?
Indeed, I put on the 255/65/19 last tire change. After 2k on them, about 60/40 on/off road I've formed a pretty good opinion of them: I absolutely love 'em. I was previously running stock sized Duratracs, they were much better than stock tires but with almost no sidewall. I wanted... -
-
Water Pump Replacement - Preemptive?
Indeed, and just as important are the crossover pipes (especially the front). These 2 items are the most common assassins of our motors, and there are a lot of good threads out there on how to replace. Preemptive replacement? Yes, yes, and yes. IMO, your mileage is in the target zone. Go... -
Dealer does not recommend changing transmission filter...ever?
I've replaced the pan/filter once and drained/refilled mine twice now, and am glad I did it. My fluid wasn't terrible either time, but I'd hate to think what it would look like now if I never changed it.. I cut my filter open, and it was kind of dirty, and that was at 70k! The magnets needed... -
2015 V6 coolant pipes done. Pics of old pipes
102k on the clock when I did mine.. Both ports on mine crumbled on removal, but weren't leaking when I started the repair. In the end I'm glad I did it, and will do it in another 60k- I'm not letting an easily replaceable plastic pipe smoke this motor..! The rear was in fine shape, I'll do... -
Particulate on Valves - HELP!!
Gotcha, thanks for the input.. Every once in awhile, I hear someone saying that this stuff clogged their Cats, or some other downstream issue.. I'd like to get back into regular cleanings every 15-20k or so, and would like to do it myself.. -
Particulate on Valves - HELP!!
Has anyone else here used this CRC product? I'm very interested, but wanted to get some input prior to using it- I've seen the back of my valves and wonder if there are any drawbacks/dangers to this.. -
Particulate on Valves - HELP!!
Are you taking the intake off? I know you can just tilt it to work on the front bits, but you might want to take it all the way off to verify all is clean. Then you can get a vacuum in there to suck everything up. We're only talking a few minutes to get it off, and then you can have the... -
PCV Valve Replacement
Gang, For the 100k birthday/tune up, I decided to go after the PCV valves. This was preventative- I wasn't getting any smoke or codes. This is an easy job, but worthy of a write-up as there are a couple of tricks to make this easy. Time: 15 minutes. 30 minutes if you're going slow, or drunk... -
Particulate on Valves - HELP!!
That's the way they look, especially when untreated.. I saw this on many threads when people had the intake off, and in person when I did the pump/x2 crossovers. It's not great, but I don't think it's overly harmful- I think it's just a symptom of the EGR in these engines. I know of 2 ways to... -
V8 Coolant Manifold / Crossover & Maintenance Parts List
This is the hose to the throttle body we're talking about correct? If so, I'm pretty sure it rests on the block for about 90% of it's way back to the front. If this is the hose, I might be able to find a pic I used as a reference while putting it back together. On the eyelet on the... -
Beware: OEM vs Garbage
This is mine at 102k.. Disintegrated on pullout.. The second pic shows the new OE pipe properly seated- the Atlantic Briitish one never went this far down and I could see the O-rings when bolted down.. Yikes! MP -
Beware: OEM vs Garbage
Indeed, Philmont! They cancelled last year due to Covid, so we're chomping at the bit to get down there.. I've got to get this rig buttoned up pretty quick and shake it down prior to the trip.. MP -
Beware: OEM vs Garbage
On Soapbox: Just a friendly service reminder to make sure that you are using quality parts on your rig. Today I got burned by a garbage crossover pipe, from Atlantic British of all places. When you search "crossover pipe" on their website, the OEM doesn't come up- only this gem does. Some... -
Oil in intake manifold
Thanks for setting up this post, I just pulled mine and it's a little oily also.. Does anyone know where to get a catch can for these, or do you just have to rig one up? And what happened last weekend that inspired all of us to go after the crossover pipes at the same time?! That damn chip in... -
V8 Coolant Manifold / Crossover & Maintenance Parts List
Thanks Stuart, wish I would have read this prior to heading to the dealership.. I'm $80 lighter, but at least I got an answer: In the pic below is the LR045238. My assumption was correct, the connector that my finger is on is indeed capped off internally. So I'm back on track.. Halfway... -
V8 Coolant Manifold / Crossover & Maintenance Parts List
Hey Guys! I got into this job about 2 hours ago, and it wasn't long before I snapped that small plastic coolant line off inside the front of the water pump. It looks like there is a redesign that is mentioned in the beginning of this thread, using the LR045238 and the LR049989, but from the... -
LR4 Transmission Fluid Change: Pan Swap Option
It's not too big of a PITA, it just takes a fair amount of time on your back.. I've never heard of someone clogging a filter on one of these, but since I plan on running mine until the doors fall off I decided to do the full job- kind of a peace of mind thing. I think you can pull a...
