Search results

  1. E

    LR4s out there holding their value maybe more than just quite well

    If anyone is interested: I've got a 2015 White with ebony interior LR4 HSE LUX heavy duty package with upgraded leather and pretty much everything but adaptive cruise. I recently updated both the crossovers, water pump, hoses, plugs, new rotors/pads, etc and new supercharger snout with an...
  2. E

    LR4 - LCA - Longevitiy/Diagnostic

    I swapped out all the bushings (lowers/uppers) on our old 2006 LR3 with the green and some orange for the lower control arms and loved how it felt. I plan on doing it on the 2015 when it comes time.
  3. E

    OIl Leak - top of engine

    Read through this and it has the specs for the oil housing bolt torque specs.
  4. E

    GOBI Rack Issue

    Which dealer? Personally, I'd ask for a refund and also contact your credit card if that is what you used to pay. They are now well outside the original quote time and you're also saying GOBI cannot confirm and order from them.
  5. E

    2016 LR4 SCV6 Coolant Issues

    Robin, was it the back crossover that failed on yours or the front? The rear has not been updated. Mine is a 2015 and I proactively changed mine awhile back at 65k. It had the old style front and I updated it to the newer more robust style but the rear is still the same crappy sandwich style...
  6. E

    Let's try to get the facts down on tensioner issues

    Post the pics if you have them, thanks!
  7. E

    My Day for Dumb Questions-Engine Rotation Direction

    Yes, tape off everything including your fuel lines, the walnut shell goes everywhere!
  8. E

    Well crap!

    If you end up going the dealer or indy route and they pull your supercharger i'd have them also change the isolator bearing and supercharger oil while you have it out as the part is cheap and pulling the charger is 95% of the labor involved in doing that.
  9. E

    Well crap!

  10. E

    Rotating 5.0L Engine Manually

    Screwdriver could score if used too aggressively. I used the small long screwdriver after 90% of the walnut shell blasting. I didn't do this blindly. I ended up with carbon on the back side of the valve stem that cupped it like a 'c'. I used the screwdriver to pop it off and then vacuum it up. I...
  11. E

    Rotating 5.0L Engine Manually

    When I did (walnut blasting) mine I bought one that was for a mini cooper. Maybe from FCP euro but I don't remember. https://www.ecstuning.com/b-genuine-mini-parts/carbon-blasting-tool-kit-mini-gen-2-turbos/81292208038kt/ It was a super messy job even with the tool. Cover as much of where you...
  12. E

    Well crap!

    I updated mine as well to the new style front crossover pipe. The weak link in the cooling system at this point seems to be the rear crossover as it has not yet been updated. I changed my rear out as well even though it was the same but new while doing a bunch of maintenance parts.
  13. E

    Black Rhino Arsenol 18” Wheels

    My brother in law has these on his new Tahoe, they look great.
  14. E

    Rhino Rack Pioneer Platform and Batwing Awning

    How is your cut holding up - have you had to reinforce it I like the idea of getting this lower but a little nervous that cut my fold.
  15. E

    Lower center console removal?

    501-12- Instrument Panel and Console Floor Console Upper Section (G1451975) REMOVAL AND INSTALLATION.pdf
  16. E

    Odd Engine Noise part 2, with video!

    My LR3 had an exhaust leak that sounded like that, quiet until I revved it up. Mine was actually leaking at the manifold to cat 3 bolt flange. I think it had shifted over time as there is no gasket between the two. Mine was consistent though or worse when cold and would get a little better as it...
  17. E

    Showoff Your LR4

    265/65R18 No lift rods and no rubbing at stock or access mode height.
  18. E

    Showoff Your LR4

    New set of EVO Dakar wheels - gloss black with BFG KO2's (including full size spare). I plan on removing the white vinyl lettering on the wheels but haven't had a chance yet and i've ordered fake black gloss LR center caps that'll match better. This is stock height and no rubbing. Also, can run...
  19. E

    Supercharger Rattle?

    Bummer, you've really had some bad luck but it sounds like things are starting to turn around. Which tune and what not are you running? I'm thinking about upgrading mine as well. I just installed 265/65r18 BGF KO2's with the EVO Dakar wheels and I'm feeling I'd like a bit more oomph - haha.
  20. E

    Alternative to Dealer Only Castrol Professional "E" for 2014-16 LR4's

    Mine is out of warranty and I'm running Liqui Moly Synthoil 0w-40 (Moly LM2050).
  21. E

    18" Wheels - EVO CORSE DAKARZERO

    Does anyone know if the stock land rover center caps fit the EVO Dakar wheels? I'm considering ordering a set of these or the Tuffant steel wheels. I like the load rating of the EVO wheels but much prefer the price and maybe the look of the Tuffant wheels.
  22. E

    roof rack

    How are the prospeed racks holding up - rust issues? I'm considering one of these or going with the Rhino rack with the backbone mount and their expensive fairing.
  23. E

    2013 LR4 engine noise from back, not timing chain

    Seriously...I'd get the truck out of there! Sounds very shady for your mechanic to tell you he'd like to make an offer.
  24. E

    Engine troubles - 3.0L SC V6 - possible multiple-injector failure

    I'm not sure what year you have but the passenger side is a pain to remove - at least on the 2015 3.0. The fuel rail has to come off from underneath to remove the injectors. I replaced a leaking valve cover when I rebuilt my supercharger snout and walnut blasted the valves. I thought about...
  25. E

    a/f leak

    No lube, just make sure all the mating surfaces are clean.

Latest posts

Members online

Total: 277 (members: 8, guests: 269)

Forum statistics

Threads
36,251
Posts
217,923
Members
30,493
Latest member
A562NV

Share this page

Top