Search results
-
numerous codes after lower control arms installed
I'm having the same issue. local reputable mechanic replaced my upper control arms and the truck sits on the bump stops. Compressor runs then shuts off right away. I suspected a leak, but, there are a couple things this thread has suggested, More than likely an alignment? He suggested an... -
Red Suspension Fault 2006 LR3 SE
i had my rear upper control arms replaced both sides. My mechanic recommended alignment. the truck dropped after the second rear left was replaced and gets the suspension fault lights. So...are you saying if the rear wheels are out of alignment it will throw this fault? -
Electronic Parking Brake (EPB) failure
UPDATE: The squeal was just a minor adjustment, and i had them clean up my emergency brake cables for $190. Didn't fix my suspension faults. -
Electronic Parking Brake (EPB) failure
My EPB also is screeching. I took my LR3 into the mechanic to replace the upper control arm and bearing. In the process he cut the brake line and replaced it. But when I got the truck back the suspension was dropped. It never came back up and I got a suspension fault error on my dash. I went... -
Hi from Spain
I'm envious. That's a beauty. From Canada near Toronto- sonicpix
- Post #4
- Forum: Introduction
-
Compressor Brand
I got the Hitachi about three years ago and it works fine. Popped it in. Restarted a few times and it took. Ended up also having to repair wiring about six months later, because of water leaks, but the compressor has been good. -
When is it time to say goodbye?
I have a 2006 LR3 HSE with 260k km. Also in Canada. My repairs have been mostly typical. I'm getting bearings done now. The suspension compressor went. I've been lucky but it sounds like I have the best of the engines. Thought the same thing about getting rid of it. But what would I get as a... -
Be honest! What's the deepest snow you've driven in with your LR4
My daughter and her bf used my LR3 to go to a cabin they own close to Algonquin Park. They posted a video on their YouTube channel. They struggled in maybe 12 inches but it had a slick base. I have Nokians WGR 4 or something like that. And i agree with others.....if the road is slick then the... -
Deafening Static from all speakers
Just had the same thing happen to me and found this. For me....I think it was because I was working on replacing the rear left power window motor. I gave the switch connector a shot of electrical contact cleaner. I figured it may not have dried completely. Pulled it out...was quiet. Put it back... -
2006 LR3 Rear Hub Assembly
My first point in the repair was to replace the lugs. Many were rounded and almost all were swollen. I used a nut remover for most, but one wouldn't release. After removing the chrome and getting to the harndened steel nut, i snapped it off. Now I am drilling the remainder out. So it looks... -
Cant track down Lug/wheel studs
good info. Thanks. I'm having this issue but for my rear. My lugs were rounded (six or more I think). One I could not removed, so after cutting the chrome off to get to the hardened steel, I snapped off the lug and now have to drill out the remainder. Pretty confident my stud will be shot... -
2006 LR3 Rear Hub Assembly
thanks. after posting i found a video from powerfuluk. looks a bit tricky but I think I can pull it off. Was a shame I didn't get to this sooner. I took a road trip to the farthest northern road on the east coast I can drive to. Had to take the Lincoln instead. Not as much room for... -
2006 LR3 Rear Hub Assembly
2006 LR3 HSE with 260k km. My mechanic doesn't like working on this vehicle. Yesterday I asked him to look the vehicle over before a road trip to James Bay. He thought the front bearings might be going and advised to go to a mechanic that works on bearings for European cars. I decided to... -
Light Bar suggestions?
I have the factory installed high beams. How do these compared with that, if anyone knows. I know when I have mine on, it's like being in a football stadium. I've considered swapping them for after market brands, but not sure it's worth it. -
Can you identify this sound? (Video)
Mostikley the clocking. I replace mine. Turns out it was ok. Not a difficult job but requires a special tool and if you do it, make sure the battery is drain so you don't trigger the air bags. There is a good YouTube video on removing the steering wheel. -
LR3 Pretensioner repair
I did remove the clock spring which was surprisingly easy, if not intimidating. The scary part was forcing the bag back in. It took some good pushing to get it to click back in place. Was frightened I'd set it off. -
2006 LR3 HSe wiring question
I don't think it is. The previous owner didn't seem like someone to add things to the vehicle. And according to LR, she did all of her repairs and service at LR. After hunting it down I think it relates to seat belt wiring. I think. -
LR3 Pretensioner repair
Is this possible without having to replace the part? As others have read, the SRS red light comes on the dash when the pretensioner wire frays. So I've read. It seems like a design flaw but it happened after I bought the car. I think with my wife and I changing the seating position, I... -
2006 LR3 HSe wiring question
Sorry for the delayed reply....had to reset pw. Found on another forum where someone was adamant to look for a red corroded wire. They were right. I couldn't see the actual connection, I just gently tugged red wires and it came right our. Used a heat shrink butt wire connector. Problem is... -
Have the Transmission, HDC, Brake Light, Suspension Lowering Problem!
There turned out to be a lot of water in the passenger side floor. So much so, I think I saw tadpoles. My mechanic fixed it, I dried it out, the vehicle raised to normal height for a day or two, and then lowered. I may not have dried it out enough. We've had zero rain in SW Ontario since the... -
Faults with new to me LR3
Good to know about the IID tool. I joined a fb group for it and will probably get it......just need to bite the bullet on the price. -
2006 LR3 HSe wiring question
replaced it again, still lowering. Mechanic fixed the water problem from the sunroof. I dried it out....mostly. Rode nice for day and them has lowered again. I think I need to dry it out better. Mechanic also repaired the wiring issue and heat shrunk the seal like it should have been done... -
2006 LR3 HSe wiring question
yes I did swap the switch with an older one I had in stock. However, I am ordering a new one from LR. This problem is definitely water....I hope. We had a lot of rain last night and the carpeting is very literally, dripping with water. My mechanic is going to fix it Friday after I told him... -
2006 LR3 HSe wiring question
I am having the regular three amigos warnings. A recent thread I found here mentioned water in the passenger side floor area. That is a problem as the nipple for the drain was deteriorated. Don't know why I didn't check it before. When I looked I found this in the photo...yellow with green... -
Faults with new to me LR3
I've been scouring these forums again for a repeated issue....orange warning lights related to suspension etc. I had this before and it was the driver side sunroof drain leaning because of the connector at the fire wall. Never occurred to me I could have the same issue on the passenger side...
