Search results

  1. Toothbob

    Showoff Your LR4

    BFG AT in 265/65R18 on 18” LR3 wheels with Bora spacers.
  2. Toothbob

    Showoff Your LR4

    Got a chance to get the Rover dirty for the first time in too long.
  3. Toothbob

    Introducing myself and my 2015 LR4 with ARB Bull Bar - Need Advice

    Great looking truck. Welcome. I’m sure much more knowledgeable people will chime in but let me try and answer from my limited experience. 18” gives you more options but most people are looking to upsize from the stock size, and having more sidewall allows you to air down for more traction and...
  4. Toothbob

    Steering wheel shake

    I’ve fought this issue with my truck as well. I would strongly recommend using the IIDtool to put the truck in alignment mode (rigid or something mode, can’t remember what it’s called) and have a really good shop do a four wheel alignment and road force balance.
  5. Toothbob

    Door panel replacement

    So I sourced a junkyard door panel for my LR4. The window sill area where I set my elbow has worn through and become sticky. The new panel has the memory seat buttons which my old was doesn’t. I assume I can install it and the buttons just won’t work since there’s probably some computer module...
  6. Toothbob

    Showoff Your LR4

    Finally got the ARB on
  7. Toothbob

    Winch recommendations for ARB deluxe bumper

    So I ended up with a Smittybilt winch. We are having some issues trying to fit it. Anyone used this setup and could give me some hints?
  8. Toothbob

    Winch recommendations for ARB deluxe bumper

    Oh absolutely. A 12k is what I was thinking. I guess I was wondering more about fitment issues or clearance inside the mount point.
  9. Toothbob

    Winch recommendations for ARB deluxe bumper

    For those of you that have installed the ARB Deluxe bumper, what should I be aware of when picking a winch? It’s a big truck so obviously a good capacity, and I’ve become a big fan of synthetic lines. Advice?
  10. Toothbob

    Clarification on 275/65/18 LR4 fitment (I've searched)

    After several hours of searching and reading I am still a little unclear about fitting BFG K02s on my LR4. I'm currently running Cooper Discoverer AT3 in 265/65/18 on LR3 18" rims with 1.25" spacers. I have done minor trimming of the wheel liners and significant trimming of the frame horns. I...
  11. Toothbob

    Vibration when turning steering wheel

    So I have a 2011 LR4 that I'm running 31.5" tires on 18" LR3 rims using spacers. About a year ago I installed this wheel and tire setup with no issue aside from some rubbing that a little trimming fixed right up. About 6 months ago my local independent shop did the lower control arms. We opted...
  12. Toothbob

    GAPIID Recommended Updates

    I really liked being able to add the digital speed to the cluster.
  13. Toothbob

    ARB winch bumper need hardware / mounts / brackets.

    So I did go ahead and order the install kit from ARB. Looks to be very complete. It's expensive ($723) and will take forever to get here (3-4 months). I'm going to attach below the list of parts that comes in the kit just in case anyway else needs to go down this road in the future. Material...
  14. Toothbob

    ARB winch bumper need hardware / mounts / brackets.

    As long as I can figure out a way to attach it well enough that is doesn’t crash down on anyone. Damn things heavy.
  15. Toothbob

    ARB winch bumper need hardware / mounts / brackets.

    Wish I had seen this yesterday. I ended up driving out at picking up what I believe is the bumper OP mentioned. It was very clean but missing everything. I’m in $500. Guess it’s time to call ARB myself and decide if I want to go down this road or hang it on the garage wall as a decoration. ;)
  16. Toothbob

    2012 LR4 Slow interface screen

    Nothing hardwired for me. My phone is Bluetooth paired so that initial pairing after startup may take some computing?
  17. Toothbob

    2012 LR4 Slow interface screen

    Just to cover my bases, is there a way to do a hard reset on it? I tried pulled the battery and connecting the terminals to discharge the system but I didn't have any luck. Maybe I just need to leave it longer? (I left it about 5 minutes)
  18. Toothbob

    2012 LR4 Slow interface screen

    Just disconnect or should I connect positive and negative to completely discharge everything?
  19. Toothbob

    2012 LR4 Slow interface screen

    Hmmm... Sounds like what I need. Maybe someone else can chime in on the "master reset."
  20. Toothbob

    2012 LR4 Slow interface screen

    Hey gang, After foolishly selling my LR3 a few years ago, I'm finally back in a Rover. I'm loving the LR4, but I do find a few oddities. I understand it's a common issue, but the interface/radio screen is really obnoxiously slow sometimes. Even the backup camera can often take 20 or 30 seconds...

Latest posts

Members online

Forum statistics

Threads
36,251
Posts
217,914
Members
30,493
Latest member
A562NV
Top