D2 start issue

[InsertAliasHere]

Hey folks, new member here. Did some searching but didn't really come up with to much so I though I'd just throw this out there.

I have a 02 Disco with 130k on the clock that recently decided to not turn over when warm. Traced the problem back to the fuse box where the starter relay is not receiving a ground path. I grounded the relay pin to the chassis for now and it's starting fine but would like to try to resolve this. Everything got wet during a water crossing (tranny computer, etc...) but once everything dried out it was fine. Then a few weeks later this. Any insight or troubleshooting ideas would be awesome!


Sent from my iPhone using Tapatalk

 

[joey]

Sadly the fuse box on the D2 is known for corrosion issues, if you get everything wet, the odds are you have corrosion starting.

 

[InsertAliasHere]

Sadly the fuse box on the D2 is known for corrosion issues, if you get everything wet, the odds are you have corrosion starting.

Hmm, it's worth a check. I hope it's something simple like that and not a computer issue!