Height Sensor part?

[Trynian]

So after you take a sensor off or put one on do you need to recalibrate it?

It will work but height will probably be off. Yes you will need to recalibrate a new one to match up with the others correctly. The old one probably not.

 

[Zac Alnaqash]

Hi Guys,

I know the last post on this subject was back in 2010, but I'm looking for the height sensors stock rods (all 4) for my 2006 LR3, the previous owner had lifted the car up with Johnson rods and I would like to put it back to its original height. If someone has them and wana sell them to me or if can tell where I can get them.

Thanks

Zac

 

[Houm_WA]

I just got mine at the dealer...they aren't too expensive. I'm sure Lucky8 or Atlantic British sells them, too.

 

[Zac Alnaqash]

The dealer only had the whole sensor assembly, they didn't have just the rod? do they sell the rods only and whats the part number.

Thanks for your help.

 

[Zac Alnaqash]

Neither Lucky8 nor Atlantic British has them. They only hav the lift ones

 

[Houm_WA]

Buying the whole assembly is not a bad idea. Spare sensors are good to have...