Hello I am new to landrovers and have an ex military series 2a. I found the brakes very poor and have been working on them. I have replaced seized wheel cylinders and brake shoes. I have a query? two of the top pull of springs are fitted onto a post that is attached to the backplate. the other two brakes have the springs across the two shoes. Both cant be right. The springs that go to the post on the backplate mean that one shoe is only held by one spring. Any comment welcome. regards Kels
series 2a brake springs
- Thread starter K. Hanna
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
S
squire
Guest
Check out this site
www.series2club.co.uk/
www.series2club.co.uk/
danshepp
Full Access Member
- Joined
- Oct 18, 2007
- Posts
- 56
- Reaction score
- 0
re series 2a brakes
just looking at my trusty haynes manual and this shows the brakes for a series 2a are twin springed front and rear. the only thing i can think of is that someone broke a spring at one time and never replaced with original. there are no diagrams with spring attached to backplate on any series 2, 2a,3 front or rear
just looking at my trusty haynes manual and this shows the brakes for a series 2a are twin springed front and rear. the only thing i can think of is that someone broke a spring at one time and never replaced with original. there are no diagrams with spring attached to backplate on any series 2, 2a,3 front or rear
