mbw's latest activity

  • mbw
    mbw replied to the thread Boot height Q (sleeping inside).
    I slightly raised and leveled the fridge so that its part of the platform. The cabinets wrap around it pretty close. You can't even...
  • mbw
    Meyle HD arms, they are still rubber without the oil filling. Stay away from poly they are harsh and can break things. Get an air...
  • mbw
    mbw replied to the thread Boot height Q (sleeping inside).
    Ya, I like having my water/tire on the rear, roof rack is just for my 23 Zero 270 awning, maxtrax, full sized shovel and my two room...
  • mbw
    mbw replied to the thread Coolant Vacuum Fill.
    • IMG_1490.jpeg
  • mbw
    mbw replied to the thread Coolant Vacuum Fill.
    Mine went to about -25. Then close the valve and shut off the compressor. Let it sit for a minute and make sure you don't have leaks...
  • mbw
    mbw replied to the thread Actual Water/Oil Temps.
    I use a vacuum fill tool for my coolant which I highly recommend. No bleeding required after using it. I recently replaced my original...
    • IMG_2079.jpeg
  • mbw
    mbw replied to the thread Boot height Q (sleeping inside).
    I think you could fit two people just fine if you are ok with sleeping in a slightly small "full" bed.
    • IMG_3345-X3.jpg
  • mbw
    mbw replied to the thread Boot height Q (sleeping inside).
    Frontrunner drawers with custom platform cabinets (2nd row seats out, only 4 bolts per seat to remove). I keep my 50qt ARB fridge in...
    • IMG_3305-X3.jpg
    • IMG_3309-X3.jpg
    • IMG_3316-X3.jpg
    • IMG_3315-X3.jpg
    • IMG_2123_HEIC-X3.jpg
  • mbw
    My wife and kids would probably freak out doing Hurrah Pass to get to Chicken Corner, but it is a nice easy/moderate set of trails...
    • i-LgzNcSv-X3.jpg
  • mbw
    mbw replied to the thread Firewall feed-through?.
    understood, i just wanted to post that for posterity so that others understand the risk. Those wires are easily damaged and could be a...
  • mbw
    mbw replied to the thread Firewall feed-through?.
    I do not recommend this location. Way too easy to damage wiring loom/harness there. The brake booster grommet has nothing running...

Latest posts

Forum statistics

Threads
34,746
Posts
202,238
Members
28,326
Latest member
SassyManes
Top