-
-
Just picked up the truck and asked if the parts were updated, they said it was. Here are the parts replaced: -
if you really want better brakes I've seen some people fit the 10-13 RRS Supercharged 6 piston brake calipers to LR4. Only problem is...
-
THE best performance is a healthy engine for the 5.0 V8. The best performance upgrade for the SCV6 is swapping out the lower pulley and...
-
Utah_Rob reacted to Michael Gain's post in the thread Front passenger axle threads stripped by axle nut...looking for advice with
Like.
Inboard side is the second AutoZone picture I posted. The long shaft transverse through the axle carrier into the front diff. No... -
Utah_Rob reacted to Finlayforprez's post in the thread Steam Cleaning of Engine / Undercarriage? with Like.
I had the undercarriage pressure washed with hot water and it came out awesome. The detail place used jack stands in the front and then...
-
If it's just a small hole you can actually use 3M 5200 Marine Sealant ($15 at Home Depot / Lowes probably cheaper on Amazon) on it - I...
-
Utah_Rob reacted to Mozambique's post in the thread 2010 LR4 LCA replacement...... drive shaft pain :( with Like.
For those thinking of doing their LCA's, here's a summary of my general experiences: - In total took around 16hrs, but this involved a...
-
Utah_Rob reacted to alldazed's post in the thread Inner CV joint separated during lower control arm replacement with Like.
FWIW I just replaced front passenger axle shaft on a 2011 rrs which uses the same part. I was intimidated by it initially but it went ok...
-
Utah_Rob replied to the thread Inner CV joint separated during lower control arm replacement.Tried doing this and tore the inner boot. It seems I have two options at this point: 1) boot kit or 2) new half shaft. Neither sound fun...
-
Utah_Rob reacted to CPalacay's post in the thread Inner CV joint separated during lower control arm replacement with Like.
With both front wheels off the ground, you should be able to rotate the wheel hub while pushing inward on the CV shaft. This should...
-
I have now done this on the 2013 and the 2016, V8 and V6, respectively. It's exactly the same job on either configuration. Yes, it's a...
-
Deleted double post
-
Finally getting after replacing front lower control arms and rear upper control arms on my 2013 LR4. Got the front lower control arm out...
-
-
Loading…
-
Loading…
