LR4 Roof Rack Question(s)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

GoLoaf

Full Access Member
Joined
Apr 10, 2013
Posts
196
Reaction score
8
Your setup looks good. What brand of bike holder is that you have?

Thanks. That is a Yakima ForkLift.

I've only used it once so far, but it worked well. One thing I've noticed is that in order to clamp it on just the aluminum part of the crossbars, it ends up sitting fairly in-board. Add the height of the vehicle, and it becomes less than super easy to get a bike up there (although it does help that my bike is light).

I'd at least suggest mounting the bike carrier on the driver's side. That way your person is on the non-drive side of the bike when you mount it. The greasy drive train can get you if the carrier is on the passenger side.

When I get some free time, I'll be rearranging my carriers (and maybe I'll post some better pics).
 

crtfour

Well-Known Member
Joined
Oct 25, 2012
Posts
45
Reaction score
2
I bet it IS tough to hoist a bike up there. I have a couple of mountain bikes and usually put them inside. But when we take a trip and fill the Rover with our dogs, luggage etc, I usually mount them on my hitch rack. But when it rains they get absoultely filthy....the Rover seems to kick up more road spray that other vehicles I've had.
 

GoLoaf

Full Access Member
Joined
Apr 10, 2013
Posts
196
Reaction score
8
I think the flat back of the LR4 creates this giant swirling vacuum behind the vehicle when you're traveling at speed, so any weather you're going through gets applied nicely all over the rear hatch and anything sitting on a hitch rack.

I've seriously overthought my bike carrying capabilities. I've also got a Yakima Swingdaddy, and my crew is all roadies, so this is how I do it:

1 rider (me): bike inside
2 riders: one bike inside, one on top
3 riders: three bikes on the hitch carrier
4 riders: three on the hitch, one on the top
5 riders: four on the hitch (tight fit), one on the top
6 riders: I'd have to buy another carrier for the top.

Good times!
 

alexcorral

Full Access Member
Joined
Apr 23, 2011
Posts
581
Reaction score
17
Picked up the skis yesterday and now I think I'll need a roof setup to haul them around. Yesterday I brought them home in the back of the LR4 (I removed my 2nd row center seat for easier access to the third row).

When heading out to the slopes I'll likely be driving the RRS and taking passengers so I need something to go on the roof. I was thinking OEM rails, crossbars and ski carrier and then I found this Rhino Rack System that includes the rails and cross bars. Then I would need to attach the ski carrier to the crossbars.

Anyone had any experience with Rhino Racks?
 

ycharlie

Full Access Member
Joined
Aug 11, 2010
Posts
315
Reaction score
0
I bet it IS tough to hoist a bike up there. I have a couple of mountain bikes and usually put them inside. But when we take a trip and fill the Rover with our dogs, luggage etc, I usually mount them on my hitch rack. But when it rains they get absoultely filthy....the Rover seems to kick up more road spray that other vehicles I've had.
i mount my mountain bikes on the roof and it's not fun... at all. i am 6ft tall and it does take some time to get the bikes up and down. but it will def require a lot of upper body strength.
http://www.flickr.com/photos/39553560@N00/11072603206/
 

alexcorral

Full Access Member
Joined
Apr 23, 2011
Posts
581
Reaction score
17
I ended up getting this setup:

RSPT508_3_1000.jpg


Vehicle_1319_2008421.jpg


Together with this ski carrier (4 pairs of skis):

564u_1000.jpg
 

alexcorral

Full Access Member
Joined
Apr 23, 2011
Posts
581
Reaction score
17
Got the hardware today. A few days ahead of time! Great service from eTrailer.com

I'll install on Friday and take pictures to post later.
 
Last edited:

Biagetti

Full Access Member
Joined
Dec 23, 2012
Posts
201
Reaction score
0
I along with my dad have both had good experiences with etrailer as well.. would definitely recommend them.
 

alexcorral

Full Access Member
Joined
Apr 23, 2011
Posts
581
Reaction score
17
First take off the rail guards
1459825_10151754429741993_1018824604_n.jpg


Remove the three plastic thread studs and twist the rail guards outwards
1470064_10151754429776993_694177234_n.jpg


Trim the front tip of the rail guard, just up to the front perforation and install it back on
1422629_10151754429841993_478971303_n.jpg


Repeat the same process on the rear tip of the rail guard
1451981_10151754429906993_1655480411_n.jpg
 

alexcorral

Full Access Member
Joined
Apr 23, 2011
Posts
581
Reaction score
17
When laying the rails on the roof the front and rear will stay separate from the roof since the rail is flat and the roof is curved. This is how the front looks
1426160_10151754429971993_1916198732_n.jpg


And the rear
1450162_10151754430006993_1351548205_n.jpg


Bolt down the center first
1463109_10151754430071993_1661144046_n.jpg


Front next
995599_10151754430116993_937484989_n.jpg
 

Latest posts

Members online

Forum statistics

Threads
36,258
Posts
217,997
Members
30,494
Latest member
Izanagi
Top