Range Rover 3.0 TD6 Automatic gearbox problem
- Thread starter rado
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
- Joined
- Jun 28, 2004
- Posts
- 10,473
- Reaction score
- 181
What year RR and What exactly does it do? Are you sure it is going into gear?
- Joined
- Jun 28, 2004
- Posts
- 10,473
- Reaction score
- 181
I would check the linkage and make sure the transmission is even going in gear.
33CHINACARS
Member
- Joined
- Dec 3, 2011
- Posts
- 9
- Reaction score
- 3
Don't want to scare you but it could be a bit more serious . Common fault. The metal in the Hydraulic cylinder is soft & wears . As it wears you loose pressure to the clutch plates . Particularly the ones in the torque converter . Clutch material then goes through the cylinder & creates more wear. A never ending circle. The transmission is a GM 5L40E . I've had mine rebuilt with some stronger parts. Not cheap though. IIRC it cost me about AU$ 7500
- Joined
- Jun 28, 2004
- Posts
- 10,473
- Reaction score
- 181
Sadly we do not read or write Finnish very well:
Which part is most broken when the first disappears R and then D? Turbine / Torque Converter or What?
Similar threads
- Article
