2016 LR4 Camera system not working at all!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Rover Range

Full Access Member
Joined
Jun 13, 2022
Posts
535
Reaction score
290
Location
Texas
You may have a camera "pulling " down system.
Try connecting one camera at a time- start vehicle- and see if you can isolate the bad one.
 

greiswig

Full Access Member
Joined
Mar 1, 2021
Posts
550
Reaction score
215
Location
Oregon
Update- I purchased a used camera module from eBay. Swapped it out and it immediately started working!! Couple days later, the thing dies again- same issue as before. Now, have I pooched 2 modules, or is there something else going on? Why did it work for a few days? Very frustrating for sure...
At this point, I’d be experimenting with plugging in the old module to see if it shows the same behavior.
 

JimmyY

Member
Joined
Oct 24, 2021
Posts
19
Reaction score
6
Location
Canada
Great advice, thanks ! Unfortunately no matter what combination I do the camera module will not function. New/old or any combination of cameras connected, even zero cameras connected, nothing ! Hard to believe something in the vehicle is crapping out these modules. I've been thinking of replacing the head unit with a more modern one- any chance it could be head unit related? Would suck to spend $1000 on a head unit and still doesn't work though.... Guess I should see what the dealer suspects.
 

Rover Range

Full Access Member
Joined
Jun 13, 2022
Posts
535
Reaction score
290
Location
Texas
Does the park aid switch flash on and off?
A bad park aid sensor can cause the cameras not to work.
 

JimmyY

Member
Joined
Oct 24, 2021
Posts
19
Reaction score
6
Location
Canada
It does not. Sensors seem to be functioning normally. I have a hitch bike rack and it beeps in reverse. Really missing the rear camera with the rack on in the summer!
 

Rover Range

Full Access Member
Joined
Jun 13, 2022
Posts
535
Reaction score
290
Location
Texas
With the ignition on, engine OFF, vehicle in reverse. Do the same in drive, to check the front sensors.
You will hear a faint clicking noise from each sensor.
 

JimmyY

Member
Joined
Oct 24, 2021
Posts
19
Reaction score
6
Location
Canada
Oh! So maybe it's been a failed sensor this whole time. How can I accomplish putting the car into drive/reverse without ignition on if my shifter won't come up? 2016- recessed shift knob. I think I will go around and clean all of them anyways. Thanks !!!
 

JimmyY

Member
Joined
Oct 24, 2021
Posts
19
Reaction score
6
Location
Canada
Each sensor appears to be functioning normally. Wife in the driver's seat and I cover each sensor and alarm goes off each time. Damn, I thought that could have been it!!
 

Latest posts

Members online

Forum statistics

Threads
36,222
Posts
217,570
Members
30,473
Latest member
OnoA
Top