Search results

  1. Hermes

    5.0 supercharged into an LR4?

    Hey all, sorry for the silence, like Tapps33, I underwent a move and have had no time. Furthermore the Rover is now hours away at my parents residence. Now I'm settled, I'm trying to get my build back so I can drive a Rover rather than a minivan! Despite swapping out even the transmission...
  2. Hermes

    5.0 supercharged into an LR4?

    @SCV8LR4 My main issues currently are the air suspension won't raise and comms as @Tapps33 said between ECU/TCM/transmission and consequently traction control. Would love to have my vehicle running. Did you swap all modules, flash just the ECU and/or add just coil suspension? I think we all...
  3. Hermes

    5.0 supercharged into an LR4?

    Thank you all for the suggestions, I did end up figuring out the culprit tonight, a fuel line to a high pressure gas pump on the engine wasn't tightened properly and leaking. My guess is that caused both a lack of fuel and mix of air to go into the cylinders. I apologize for the lack of...
  4. Hermes

    Water in Passenger Footwell

    If you're running AC and getting that water there, it could be due to the condensation. There are 2 rubber hoses near the footwells behind the center console trim that go through the floor and direct condensation from the cooling out. Once one of these got clogged and on a drive to Texas in...
  5. Hermes

    5.0 supercharged into an LR4?

    Ok, finally got back today to do my oil change and mess with the many still unresolved issues it has (coolant leak, need to bleed the system, multiple faults etc) but want any input on a particular issue I've run into: Whenever I try to start it, it takes 3-5 times of pushing the start, holding...
  6. Hermes

    5.0 supercharged into an LR4?

    Good Evening Gents, My engine finally got installed end of June. However, despite the complete module swap and the N/A engine running on them when I brought it in, with the SC swapped in there was nothing. Screens would come on, but no engine click or noise. It also had 28 fault codes. I got...
  7. Hermes

    WTB - LR4 OEM 19" Wheels

    I have a 3 19" LR4 rims (sold one already) but not that style if interested. I travel to the Cincinnati area often and can bring them, otherwise shipping would be a pain.
  8. Hermes

    TFT Upgrade

    The LR4 bezel also covers the side lights for the airbag and seat warning and something else which I forgot. That's why I went for completely customizing around it. It also is a bit wider and for myself I had to cut all the tabs off around the TFT cluster. It is not bolted in, but with how tight...
  9. Hermes

    TFT Upgrade

    @Tapps33 it should just be the C0 line, nothing more. Try that and then test it in the dash without putting it all back together.
  10. Hermes

    TFT Upgrade

    It is not the blue one. Infact, if I remember correctly its on the other side of the circuit board. You will have to undo those 6 torque screws.
  11. Hermes

    5.0 supercharged into an LR4?

    I've added a smaller upper pulley which adds ~25-30HP to the supercharger. They're readily available. There also is a larger lower crank pulley plus a tune which has gotten SC F-types and Range Rovers to 600+ HP. In addition, I've found a site that has high flow exhaust headers which paired with...
  12. Hermes

    5.0 supercharged into an LR4?

    Here (should be) a link to all the files for the driver I used for the EEPROM reader from my Google Drive: https://drive.google.com/drive/folders/1tKsh9QoDTUNFKX0za9e6SkqVhy7V4_W2?usp=sharing The program is initially in Chinese, but if you make a separate file within the file of all these files...
  13. Hermes

    5.0 supercharged into an LR4?

    You may not need all the modules, I wasn't going to take that risk though so I sourced a barely touched part out to get them all from. You for sure will need the instrument cluster, the body control module, and the main KVM as those all have the security code. The antennas and such may not be...
  14. Hermes

    5.0 supercharged into an LR4?

    New here and been following for awhile, but just wanted to chime in. I currently am getting a 5.0L SC put into my 2012 LR4 and should be installed within the next week. For the modules, we all seem to know just throwing in the SC ecu won't work, I tried, engine won't turn over. However, I...

Latest posts

Forum statistics

Threads
34,897
Posts
203,576
Members
28,819
Latest member
Yahuda
Top