Search results
-
Timing chain - advice - sigh
Sorry it took so long, I was busy (not fixing my Land Rover) but finishing some show cars.... Did you perform the cold start test with 2 people? As I mentioned in my prior post, someone needs to start the engine in the morning (or when cold) and you need to open the hood and listen to your...- landylandy
- Post #18
- Forum: LR4
-
New Start Button problem LR4
of course not, bought the cheapest crap from china, but shockingly it looks just like the original, down to the last detail (looks to be the same). I was thinking that might be my luck! anybody else experienced this or is it just me????- landylandy
- Post #3
- Forum: LR4
-
Timing chain - advice - sigh
So I just bought my 2012 LR4 with 103k miles and got a lot of good advice about this timing chain nightmare from 2 pro mechanics! I myself do restore classic cars and just performed lots of work on my LR4 including changing transmission oil pan and filter and ALL other fluids, brakes and air...- landylandy
- Post #9
- Forum: LR4
-
New Start Button problem LR4
Hi there, has anyone changed their start button (for optical reasons) and then could not start the car? Well I just did exchange my start button, plugged the new one in, started the car, turned it of, just to find out later in the day I could not start my LR4 anymore! Put the old start button...- landylandy
- Thread
- Replies: 9
- Forum: LR4
-
The Great Engine Oil Debate
Interesting I see no one care about the WSS-M2C925-A compatibility here. I personally think its important to get a match! only the Mobil 1 Extended Performance 5W-20 and the Castrol Edge A1 Professional 5W-20 meet the specs!!!! Of the 2 only the Mobil1 seams to be available to the public here in...- landylandy
- Post #44
- Forum: LR4
-
AMK Compressor rebuild/replace
wow, just looked on lucky8 1400$ for a amk compressor (with all the clunker) thats a little much after all- landylandy
- Post #16
- Forum: LR4
-
AMK Compressor rebuild/replace
oh! really, good to know! I will certainly check into that! thanks! no I don't wanna gamble on suspension parts either, whats the point if it fails, you do all of it again and spend more!- landylandy
- Post #15
- Forum: LR4
-
AMK Compressor rebuild/replace
I am wanting to rebuild my compressor as well just for maintenance but it appears that AMK are not rebuildable, all I can find are rebuild kits for the Hitachi compressors. Changing out the dryer is always a good idea (especially in cold and wet weather areas) but Murphy's law is, once you did...- landylandy
- Post #13
- Forum: LR4
-
LR4 air suspension stays up!
I did clear the codes a couple of days ago, when I got the scan tool from my friend. Now they are back, nothing changed.....- landylandy
- Post #15
- Forum: LR4
-
LR4 air suspension stays up!
thanks ftillier, will test that out and see if I can get it to do that! will keep you posted....- landylandy
- Post #13
- Forum: LR4
-
LR4 air suspension stays up!
hahaaa, I finally got some fault codes! C1A68, C1A69, C1A70 and C1A71 all corners of the height sensor supply! also live data reads: front left V 1.65 front right V 3.25 rear left V 3.30 rear right V 1.53 Is this a sensors defect or a module communication error?- landylandy
- Post #12
- Forum: LR4
-
LR4 air suspension stays up!
ok, so access mode is front 16" back 17", Rock Crawl is front 20" rear 21" if I have it in street mode it goes up to 18" and 19" when driving 25mph or more but then does not go back down! when I switched back from Rock Crawl to street and disangage the transfer lock, it will not go down, stays...- landylandy
- Post #10
- Forum: LR4
-
LR4 air suspension stays up!
right, not looked at the 4x4 screen. did clear all codes a week ago after servicing the landy in its full, will checks green and report back!- landylandy
- Post #9
- Forum: LR4
-
LR4 air suspension stays up!
No lift roads, all original, all reads normal in access mode (0.05) all 4 corners, a mystery !- landylandy
- Post #7
- Forum: LR4
-
LR4 air suspension stays up!
That is probably not such a good idea. The system will not know when to shut off and keep pumping air into the bags until they burst (that much I know about air rides from my restorations on classic cars and Custom's) The sensor are all looking good in the diagnostic tool data and I cleaned out...- landylandy
- Post #5
- Forum: LR4
-
LR4 air suspension stays up!
well the tool is "auto land scientech - iScan IIwt" the preset is set to road mode, but it's stands are like I would raise it up with the manual adjustment button next to the preset rotating selector. If I push it into down mode, after driving shortly it will raise back up and give me the "slow...- landylandy
- Post #3
- Forum: LR4
-
Add 3rd Row Seating to LR4 2010
It's not that hard to put a 3rd row into a base model! I too do have a 2 row only LR4 Base model 2012 that is, it has all the navigation and backup camera but no heated seats and no 3rd row. Basically you have to remove your jack tool tray from under the trunk floor and get a tool set from a HSE...- landylandy
- Post #19
- Forum: LR4
-
LR4 air suspension stays up!
Hi folks, on my 2012 LR4 now the air suspension goes up into off-road height and stays up there! When I press the button to lower the car it will stay down for a little while and then pump back up. No sagging over night, the compressor discharges after the pumping cycle (no exhaust valve issue)...- landylandy
- Thread
- Replies: 17
- Forum: LR4
