Recent content by gmal
-
G
Error code - "check brake pads"
Found the solution to this. With all doors closed, turn the ignition key to the "on" position (position prior to starting the engine). Do NOT start the engine. All dash warning lights will come on. Leave the key in the ON position for 45 seconds and the condition cleared.- gmal
- Post #2
- Forum: Range Rover
-
G
03 head lights
I just posted the instructions on how to remove the passenger headlight housing unit. It is not as straight forward as it could be - you'll spend at least an hour per side (or more, the first time around). Unless you need to replace bulbs (ie: burned out) you may want to leave it for a nice wam...- gmal
- Post #4
- Forum: Range Rover
-
G
Error code - "check brake pads"
Looking for some help on this error code. I replaced the rear rotors, pads, and pad wear sensor on my '03 Range Rover. The old sensor broke on removal and gave me the error code "Check Brake Pads". I replaced the wear sensor but am still getting the error message. Any tips/advice? How can...- gmal
- Thread
- Replies: 2
- Forum: Range Rover
-
G
Headlight Lens Replacement?
The passenger side headlight unit is a little tricky to remove, mostly due to the limited space. You will have to remove the headlight housing first, before you can remove/replace the lens. It is a job you can do yourself with a little care - and I can tell you how to remove the headlight...- gmal
- Post #4
- Forum: Range Rover
-
G
Headlight Lens Replacement?
Hello - new to the forum Hello - I am new to this forum. I have a 2003 RR - had for 4 years and am enjoying the vehicle - except for the visits to the dealer. Look forward to contributing and building up my knowledge base on the Range.- gmal
- Post #3
- Forum: Range Rover
