So I got the new piece (old and new pictured side by side below). I bought this: https://www.amazon.com/gp/product/B0813JSW2Z/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 - and as mentioned, I just cut the part I needed off the new piece, then slid and clamped it onto the old piece (slides...
More good info, thank you. I am wondering if the oil cooler pipe might be an issue for me. While I initially tried to do the job the right way (taking off the radiator fan), I wasn't able to, even w/ a 57mm/36mm clutch wrench set. It was so tight, every time I tried to get the fan loose the...
Sorry to dredge this up, but I just realized I totally forgot to report back on this after all the pandemic stuff that was going on at the time. Figured I'd leave my solution in case it helps anyone later.
So everyone that said to do the PCV was totally spot-on. I first tried cleaning the...
Good to know. I definitely replaced both o-rings (one pump side & one engine side). So hopefully it's just the check-valve making more of a mess than I expected.
Thanks again for the help
Thanks so much for the info & link. I hadn't seen your exact procedure for the bleed (followed a similar one w/o raising the tank). I will replace that #7 nozzle (and hope the new one makes a good seal in the water pump) and try again.
I'm thinking the continued leak is probably either that #7...
Great thread, thanks to everyone for all the info!
Wondering if someone might have some insights for me. Some background... I realized my water pump was probably leaking over the weekend when I suddenly got really bad belt squeal (and shortly after a low coolant level warning was another good...
Every now and then I find myself casually looking to see if there are any infotainment options available to upgrade the LR4's pitiful head unit UX (how I stumbled upon this thread tonight).
For me, maintaining factory backup camera, front/rear parking sensors, and SW/dash controls would be...
So I made it in to AutoZone yesterday. Looks like each cylinder block is throwing a "System too lean at Idle." (odb2 P2186 & P2189).
I have personally only ever used 93 (usually Costco). But obviously I have no idea what first owner used.
So any recommendations for a fuel system cleaner before...
Good point. I used to have a cheap scanner, but I got rid of it b/c it usually sucked. May try to run to a parts store today and see if they can pull the code for me.
Hi good folks. Longtime reader, first time poster and all of that...
I've had a '14 LR4 going on a year now. Maintenance wise, all I've done is change the oil so far (most recently, about 2 months and 2k miles ago). And for reference, I'm at about 83k on the clock total.
When starting up my...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.