Search results

  1. Chrisarobin

    Selling GAP ID Tool for LR4

    Thank you all for the interest! I sold it already. glad to see someone will put it to good use!
  2. Chrisarobin

    Selling GAP ID Tool for LR4

    I purchased the GAP ID tool for my LR4 last month and I just sold the car and did not include it in the sale so I am posting here. Happy to discount the tool which I purchased from lucky 8. I don’t believe it is registered to the VIN since I only plugged it in 1 time and didn’t do any...
  3. Chrisarobin

    When is it time to say goodbye?

    I feel your pain - I have a 2010 with 240k miles on it and I just listed it because I have a new VW ID4 coming and don't have the garage space.sure, it was expensive to maintain but as stated above - always a pleasure to drive with pride (almost always). I listed (see link) it high and sure to...
  4. Chrisarobin

    LR4 2010 Suspension height issue

    @ryanjl was actually spot on and Patrick from the GAP team was super supportive. the GAP Tool actually allows you to directly upload the error to them and he diagnosed the following: Hello C1A36-01 Exhaust Valve - General electrical failure NOTE: Circuit reference EXH_V_POS / EXH_V_NEG...
  5. Chrisarobin

    LR4 2010 Suspension height issue

    yes - and the suggestion to reach out support from GAP was helpful - he came back with some recommendations but to do them before touching the compressor. the code from that tool are pretty cryptic. (at least in this case)
  6. Chrisarobin

    LR4 2010 Suspension height issue

    The code I got was the code I got is U300-53. I searched around for this and came up with virtually nothing. any insight would be great!
  7. Chrisarobin

    LR4 2010 Suspension height issue

    it comes back immediately and the compressor won't turn on - now have to try to remove all of those frozen hex screws and bolts to dislodge that old compressor. any tips?
  8. Chrisarobin

    LR4 2010 Suspension height issue

    thanks - that was helpful but so far I can't find much of anything regarding this code and the GAP Toolis pretty vague regarding the issue. Feel like I could have better spent $450 and received as much information from a store bought product. unfortunately I can't find a mechanic in Norther VT...
  9. Chrisarobin

    LR4 2010 Suspension height issue

    I took your advice and that if others here on the forum and finally bought an IID scanner. This is the code I pulled. I also ordered a replacement Hitachi style compressor - and tried to pull the bolts for the casing and 2 tori crews snapped and the 3rd stripped. chances are it is the...
  10. Chrisarobin

    LR4 2010 Suspension height issue

    SSM72146 - see attached - by the way, thank you all in this community for your support over the years! my guess is that I should buy a new compressor and self install it with the original so I don't need to re-code.
  11. Chrisarobin

    LR4 2010 Suspension height issue

    Thank you for the link. This guy is great. However I do have an error on the dash indicating SuspensionFault. I’ll start with the fuse. Other suggestions?
  12. Chrisarobin

    LR4 2010 Suspension height issue

    I had no suspension fault errors until…today! Now it says Suspension Failt and the rear suspension won’t inflate. It started to but didn’t finish. At first it was an intermittent error but now full time. Any suggestions? I be not have a decent shop here that will address this. One code...
  13. Chrisarobin

    Saying Goodbye to my LR4 - Sad day

    Mine is not Lux. It’s the 8 cylinder not the 6. Would you guys suggest one site over another? Bringatrailer?
  14. Chrisarobin

    Saying Goodbye to my LR4 - Sad day

    whey back in the early 100k era. I would rather not sell it to a dealer or anyone looking to roll it. just curious what interest is like and ballpark I should list it at
  15. Chrisarobin

    Saying Goodbye to my LR4 - Sad day

    I have also just come to the realization that It's time to part with my over maintained LR4 - which has 230k miles.... family wants to switch to something electric!!! I have no idea where to look to price this - are there other postings or a guide to determine fair market value. A dealer in...
  16. Chrisarobin

    LR4 2010 Suspension height issue

    I meant to say the Driver's Back side suspension is 1" higher - any suggestions on how to correct this without going to the dealer...
  17. Chrisarobin

    LR4 2010 Suspension height issue

    I have been fortunate and had minimal repair issues with my 2010 LR4 which now has close to 240k miles. General maintenance and just a good deal of TLC. I did just notice t Mack driver side suspension was about an inch higher than all other wheels. The suspension is throwing no errors and...
  18. Chrisarobin

    LR4 V8 skipped time finally at 245k

    sorry to hear this but curious of the repair or replacement cost ? As an owner of a 2010 LR4 V8 HSE with 225K is this the end of the road? I am actually unsure of the status of my timing chain/tensioner. I did do the coolant cross overs last yearend water pump (2X) but not sure about...
  19. Chrisarobin

    Diagnosing Vacuum Hose issue

    Thank you everyone for you support here. I purchased 2 PCV valves from Amazon. Removed the old ones carefully (warmed the car up first to ensure the plastic would have some flex. Yup, both had a minor tear. Replaced them both in a few moments and tested it out. Car idles better and doesn’t...
  20. Chrisarobin

    Diagnosing Vacuum Hose issue

    thank you - just curious where this location is you are referencing? if it is closed is this something the average non Meccanic could fix DIY?
  21. Chrisarobin

    Diagnosing Vacuum Hose issue

    Thank you for posting this - I will check it out today. may be easiest just to replace both and see if that does the trick. I don't have a code reader but would this issue trigger the check engine light? it definitely is not idling correct.
  22. Chrisarobin

    Diagnosing Vacuum Hose issue

    My LR4 has over 214k miles and has been regularly serviced. I even did the water pump ( couple times) and they replaced the coolant lines that are known to leak. I am hearing a faint whistle from under the hood (closer to the passenger side up in back like near the battery) that is more...
  23. Chrisarobin

    2010 LR4 Possible vacuum hose leak noise

    My LR4 has over 214k miles and has been regularly serviced. I even did the water pump and they replaced the coolant lines that are known to leak. I am hearing a faint whistle from under the hood (closer to the passenger side up in back like near the battery) that is more evident as you turn...
  24. Chrisarobin

    Heated Windshield

    Just to confirm / wouldn’t the windshield heating element(s) connect on the outside of the vehicle considering the windshield was replaced. Is it likely or common that a typical glass repair shop could just overlook connecting it?
  25. Chrisarobin

    Heated Windshield

    Mine was replaced (several times) and most recently it clearly has the heating element (visible) and it does not currently work so I suspect the technician may not have connected it - anyone know where the connections are?

Latest posts

Members online

Total: 428 (members: 3, guests: 425)

Forum statistics

Threads
36,283
Posts
218,302
Members
30,501
Latest member
gvillalongo

Share this page

Top