Search results

  1. BendRover123

    Anyone running Tuffant steel wheels yet?

    I have the same tuffants. they are beastly, the reason i bought them was the load rating, steel just have higher load ratings i think those are ~4000lbs around so when your offroading or rock crawling and say the whole cars weight would be on one wheel it would still collapse. However thats an...
  2. BendRover123

    Storage Mod

    Fantastic you just gave me another job to do for the summer. That will be good tool parts and towing supply storage which is currenly jammed under my seat, glove compartment, mid console storage, and those rear side storage compartments. Strangely everything fits into those as well but ts a bit...
  3. BendRover123

    "Unusual" preventive maintenance?

    Another soft time item on the LR3 is actually the starter and alternator. While you never know when they fail, they will and that will basically leave you stranded anywhere. so my approach is: 1. ~150,000 replace alternator, starter, earlier if you been going through car batteries every 2...
  4. BendRover123

    Storage Mod

    Was thinking about doing the same! A few questions if you dont mind sharing: PNs on ebay examples? Was it hard to remove third row seat (any airbag connections etc) Once removed is there any cutting welding involved Are you running a full size spare or a donut spare? Does the LR4 also have...
  5. BendRover123

    LR3 Seat Rock Fix

    Which seat and what type of motion are you experiencing? Any pictures of the cable, cable attachment? This summer i was going to fix a sliding forward issue which is due to worn plastic washers in the rail forward and aft rotating cork screw. Probably not your issue.
  6. BendRover123

    Ride Height Sensor Question

    Regarding member https://www.landroverworld.org/members/tlt.19334/For the spares that you have would you mind measuring the length of the front (short) and rear (long) sensor link that connects to the chassis? Front link should be about 3.5" but wanted to confirm. I have adjustable ones and...
  7. BendRover123

    LR3 2008 Suspension Height Sensor Linkage

    Some more info Front Link: 5K483A Rear Link: 5K483B Is what i am talking about
  8. BendRover123

    LR3 2008 Suspension Height Sensor Linkage

    Hindsight 2020 not the smartest decision in my life!
  9. BendRover123

    LR3 2008 Suspension Height Sensor Linkage

    thanks you cant believe how hard it is to get that data! that is the front, since it has the 90deg twisted head, the rear has both aligned. maybe from that measurement alone i can figure out the rear from the pictures. front: 3.5" rear: ? Best Guess 4.2-4.5"
  10. BendRover123

    LR3 2008 Suspension Height Sensor Linkage

    For the front and rear I am adjusting the connecting rods on my LR3 to stock OEM length. The issue is I threw out the OEM links those that connect the sensor to the wishbones on the car and that can be removed (have those thick rubber grommets). Could any of you help me out for the rear and...
    • BendRover123
    • Thread
    • height sensor johnson rods lifting rods lr3
    • Replies: 8
    • Forum: LR3
  11. BendRover123

    Replaced rear diff pinion seal, drive shaft and breather

    I found the breather line at the fuel filler neck, no filter on mine either and spliced a new line to it and routed it over the rear passenger wheel well, along the lower side board where the aft heater lines run along, over the front passenger wheel well and along the front lower engine metal...
  12. BendRover123

    06 LR3 P0175 check engine code just came on

    Hey any information on what the resolution was?
  13. BendRover123

    Replaced rear diff pinion seal, drive shaft and breather

    I read something very similar in an offroad manual, it said check your differential fluid after you finish your wading trip or day for water contamination. Have you had experience with any contamination or water getting into the Landover Differentials? I wonder what a quick check would look...
  14. BendRover123

    2012 headlamp lens replacements

    Hey I have had much luck with the 3M type scratch removal liquid. Using a drill with a polishing pad. There is a plastic lens clear coat spray you can apply after which seems to hold up ok (used on my friends BMW lenses), also I took my LR3 lights to a car tinting shop they buffed up mine and...
  15. BendRover123

    Best Overlanding Apple iOS Maps Application

    Hey i am looking for a map that can do both, standard road directional guidance and light off-roading navigational support 4x4 where no internet is available. There are many and tons of options though has anybody actually used any of those and are there any user friendly options? Also I am...
    • BendRover123
    • Thread
    • application ios maps navigation offroad overlanding
    • Replies: 0
    • Forum: LR3
  16. BendRover123

    Replaced rear diff pinion seal, drive shaft and breather

    Great suggestion as those lines aren't wear or temperature resistant. I'll give it a try next weekend maybe take pictures.
  17. BendRover123

    Replaced rear diff pinion seal, drive shaft and breather

    One other question on the splash shield are you talking about the wheel well liner or something else?
  18. BendRover123

    Replaced rear diff pinion seal, drive shaft and breather

    Fantastic that was super helpful and the first time I have actually seen somebody state and know where it is! I'll likely just use the existing line and extend it, the little filter cap they have on those positive pressure relief lines can cause a vacuum I believe since they are one way and...
  19. BendRover123

    Increase mileage on LR3

    Btw I was able to restore my fuel efficiency after getting new catalytic converters mostly, the roof rack is next for me to install a aerodynamic fairing in the front, then maybe somehow lower the car when doing only highway driving since I have lift rods installed, the xlifter plugin computer...
  20. BendRover123

    Replaced rear diff pinion seal, drive shaft and breather

    Hey I do have a question we're is the rear differential breather and filter. How would you access them, do you need to remove anything while the differential is installed to access the breather line? Primarily I am doing wading improvements and want to raise the location of all the breather...
  21. BendRover123

    LR3 BMS Reset for Battery AGM Charging

    Probably lasts because your very diligent about the charging. That seems to help especially when you do short trips like what I take typically 3mi trips 2-3 times a day. I was thinking about buying a LiFePO4 type battery because they charge faster, I think they can take up to 20Amps charging...
  22. BendRover123

    LR3 BMS Reset for Battery AGM Charging

    LR3 or LR4?
  23. BendRover123

    Battery Issue? AGM Lifetime?

    Ah ok that answers my question, i was also mainly curious about the repair mode/ desulfization mode. I need to set myself a calendar reminder to charge it ~ 2 Months or so. I am intrigued about that add on self powered system.
  24. BendRover123

    LR3 BMS Reset for Battery AGM Charging

    Update here I killed my H8 AGM because I learned later on AGM are essentially not compatible with LR3s unless you want to kill your batteries early use Regular Flooded Cell batteries 8)!
  25. BendRover123

    Battery Issue? AGM Lifetime?

    It's crazy that a 1994 VW Golf II probably had a better and more reliable charging system hah. That should have been a Landrover Recall considering Millions of Batteries that all died premature deaths in the LR3 8)!

Latest posts

Members online

Total: 350 (members: 6, guests: 344)

Forum statistics

Threads
36,274
Posts
218,178
Members
30,500
Latest member
tflint2112

Share this page

Top