Search results
-
O
Land Rover Head Unit
thankyou very much for you replys people, I greatly appreciate them -
O
Land Rover Head Unit
ok guys, does anyone have a photo of the removal tools to remove the stereo head unit from a 97 disco? I have tried stereo shops and dealers and no one can help. I want to make some but need the dimensions and shape -
O
Disco Windshield
windscreen I am 6'3" and I drive to work with the sun in my eyes and also the same on the way home. I find it impossible to use the sun visor because when it is down it blocks the whole view of the road and i resort to the land rover stoop to look under it. the best way to see trafic lights... -
O
Fuel system issues?
Fuel Try looking at the throttle body for air leaks or dirt. does your disco idle at the same rpm normally or does it change from time to time. I had this problem and it turned out to be a split in the vac line elbow, replaced the elbow fixed hard starts, stumbles on acceleration and... -
O
1997 Disco Condenser Fans Gone Bad
Radiator The removal of the radiator is a very simple job that takes about 30mins. but I have a feeling this will not give you access to the fans because they are in front of the AC Condenser which is mounted forward of the radiator support panel. You should be able to get to fans by... -
O
cooling system question
Radiator Thanks for your imput guys, I appreciate your thoughts. I understand thet the cooling system should build pressure, just heating the fluid will make it expand. I will check the cap to see if it holds pressure when i am at work. i have the gear there to do it. I cannot see any leaks... -
O
cooling system question
Custom Radiator Joey, I had custom 4 core radiator made using the matrix from a truck radiator. The tubes inside the matrix are about twice the diameter of the original and it has much heavier cooling fin material. The old unit was repaired following an impact with a kangaroo a few months... -
O
cooling system question
I have just fitted an upgraded radiator to my 97 D1 SE7 and have found the following, The temp rises as expected and the thermostat is working as advertised. there is a good flow rate of coolant and the system stabilises temp as expected at about 1/2 on the gauge. there are no leaks and... -
O
Cruise Control
reply I have an ARB steel winch bar with Land Rover Spots modified with 150 watt aircraft landing light globes. the impact sheered the mount bolts and caused the bar to be driven back into the grill and bonnet. the bar was fine appart from some paint scratches. I have since changed the... -
O
Cruise Control
Thanks for the reply, I pulled the pump and opened it up, there is not much to these things and after a quick look I worked out how it all works, I tested the motor and it was a little slow so after a clean, dry it out with compressed air and some lubricant it ran fine. these is a small relay... -
O
Cruise Control
After hitting a Kangaroo in my 97 SE7 a front end rebuild was in order. the vehicle was in the panel shop for 5 weeks sitting idle and when I got it back I h d a range of problems to deal with. After having every computer reset in this thing, the cruse control would not work and having checked... -
O
Warning
Hey all, thought I would give you all this warning. I have a 97 se7 V8 auto that is in great condition. Last week however I had the lower steering universal joint fail without warning where it clamps onto the imput shaft of the steering box. I item is manufactured out of aluminium alloy and...
