-
-
Ttvanstee replied to the thread Misfire cylinder 8.Pulled exhaust cam off yesterday and swapped tappets between cylinder 2 & 8. Valve lash was then back in spec and once I fired her up...
-
Ttvanstee replied to the thread Misfire cylinder 8.Pulled valve cover to measure valve lash and looks like we may be onto something here. Tappets were marked when removed from the engine...
-
-
Ttvanstee replied to the thread Misfire cylinder 8.They were spilled so not placed in the original positions. Might be the source of my misery. I'll have to open up the valve cover to...
-
Ttvanstee replied to the thread Misfire cylinder 8.Could it be valve clearance. Recently did head gaskets, could be wrong sized tappets?
-
Ttvanstee replied to the thread Misfire cylinder 8.Compression sitting around 150 +/- 5 psi all cylinders dry.
-
Ttvanstee replied to the thread Misfire cylinder 8.Misfire seems constant, almost seems to be every other rotation. Cabling and grounding look good. Will have to check compression again
-
Ttvanstee replied to the thread Misfire cylinder 8.Looked into it today, but seemed to be a dead end. Is there a possibility that the intake manifold has a crack that only affects one...
-
-
Ttvanstee replied to the thread Misfire cylinder 8.Spark seems good, tested with an online spark tester and it seems to fire as expected. I've never heard of cam buckets doing that...
-
THi all, I have a 2011 LR4 that has a persistent cylinder 8 misfire. It will pop a code p0316 and p0308, does not give me a P0300...
-
-
Loading…
-
Loading…
