Please stop the madness.
I did this on my car and checked GTR to be sure.
Pull on the bezel surrounding the light. Remove 3 screws (one of the screws is for aiming), undo connector. Installation is reverse.
From GTR:
Front Fog Lamp (86.40.96)
Removal
1 . NOTE:
Release each clip individually. Clips may fall off if care is not taken.
Remove the front fog lamp bezel. Release the 6 clips.
2 . Release the front fog lamp. Remove the 3 screws.
3 . Remove the front fog lamp. Disconnect the front fog lamp electrical connector.
Installation
1 . Connect the front fog lamp electrical connector.
2 . Install the front fog lamp. Tighten the screws.
3 . Install the front fog lamp bezel. Secure the clips.
4 . Check the fog lamp beam alignment.