Ruper
Full Access Member
I got this one:
C1A13-64 (28) Pressure does not decrease when venting gallery - Algorithm based failure - signal plausibility failure
( on 28-02-2020 10:44:20 at 222298 mi )
On your compressor there is an exhaust valve assm. Its a plate roundish with 4 bolts holding the plate down. Mine had this issue and so I took apart, cleaned it out, there was only a slight film of white powder inside, however the small solenoid inside vibrates to move the valve back and forth just a hair to exhaust the pressure. I got a seal kit ready for the next time, but since I had to get on the road I took apart cleaned and put some o ring lube on all o-rings and fixed the issue. And also cleared some of the other faults with comms to the terrain control.
Look at this:
C1A13-64 (28) Pressure does not decrease when venting gallery - Algorithm based failure - signal plausibility failure
( on 28-02-2020 10:44:20 at 222298 mi )
On your compressor there is an exhaust valve assm. Its a plate roundish with 4 bolts holding the plate down. Mine had this issue and so I took apart, cleaned it out, there was only a slight film of white powder inside, however the small solenoid inside vibrates to move the valve back and forth just a hair to exhaust the pressure. I got a seal kit ready for the next time, but since I had to get on the road I took apart cleaned and put some o ring lube on all o-rings and fixed the issue. And also cleared some of the other faults with comms to the terrain control.
Look at this: