Lr3 Ten spokes with 30mm spacers still not fitting over Calipers

[bobbyk]

Anybody out there can tell me what I am doing wrong?

 

[ryanjl]

I've read where some people still need to kiss the calipers with a grinder even with 30mm spacers.

 

[roverman]

I had to grind on one caliper only. Figured maybe the wheel was a little out of round? The fit is very tight.

 

[avslash]

Yep.

I still had to grind on both front calipers when I was running the LR3 18"/spacer combo.

Just take an angle grinder to the fins on the calipers as needed and then hit them with some spray paint to cover the bare metal. I ran this combo after grinding them for aprox. 40K miles with no issues.

 

[bobbyk]

Thanks for the info,
its rubbing on both sides on the front, looks like just mm or two will fix the problem but the shop I went to wouldn't do it. Guess I will have to do it myself.