Lr4 coolant flush and bleed procedure

[abeachb73]

Hello, can anyone help me with a link in how to bleed and flush mi cooling system, I just replaced my water pump. I have a 2011 lr4

 

[Michael Gain]

https://www.landroverworld.org/threads/bleeding-cooling-system.31127/

 

[abeachb73]

How can you search for threads?

 

[ryanjl]

How can you search for threads?

 

[mbw]

I highly recommend grabbing a vacuum refill tool.

https://www.amazon.com/OEMTOOLS-244...t+vacuum+tool&qid=1565561759&s=gateway&sr=8-3

This thing makes it easy to drain and fill the coolant to the right level and without air in the system. Also lets you leak test the system.

 

[abeachb73]

I highly recommend grabbing a vacuum refill tool.

https://www.amazon.com/OEMTOOLS-244...t+vacuum+tool&qid=1565561759&s=gateway&sr=8-3

This thing makes it easy to drain and fill the coolant to the right level and without air in the system. Also lets you leak test the system.

So this tool has everything needed for lr4 system?
Also with this tool I don’t have to worry about opening bleed valves and such, right?

 

[howardduff]

You will need an air compressor to pull the vacuum. Other than that you should be ok.

 

[mbw]

So this tool has everything needed for lr4 system?
Also with this tool I don’t have to worry about opening bleed valves and such, right?

As mentioned, you need a decent compressor/shop air. You would not open the bleed valves.

 

[abeachb73]

Thank you for the info guys. I purchased the vacuum tool and it worked great. Made my life so much easier.