I only have info for the Freelander TD4 engine. hopefully this would help? I unable to attach the pictures from my service manual that accompany these 2 belts. There is one for the Compressor Belt and another for the Ancillary drive Belt. Not sure how else to help you out on this... Stew
ADJUSTMENTS
Drive belt - compressor - Td4
82.10.01
Check
1. Disconnect battery earth lead.
2. Remove underbelly panel.
+ EXTERIOR FITTINGS, REPAIRS,
Panel - underbelly.
3. Turn steering on RH lock.
4. Remove 3 bolts and RH splash shield.
5. Check condition of drive belt. Renew a drive
belt that shows sfor the igns of wear and splitting.
Adjust
1. Loosen clamp and pivot bolts of compressor
drive belt tensioner.
2. Apply an anti-clockwise torque of 38 Nm (28
lbf.ft) for an existing belt and 47 Nm (35 lbf.ft)
for a new belt to tensioner plate hexagon.
3. Tighten tensioner clamp bolt to 24 Nm (18
lbf.ft).
4. Tighten tensioner pivot bolt to 24 Nm (18 lbf.ft).
5. Fit splash shield and tighten bolts to 10 Nm (7.5
lbf.ft).
6. Fit underbelly panel.
+ EXTERIOR FITTINGS, REPAIRS,
Panel - underbelly.
7. Connect battery earth lead.
Or;
REPAIRS 86-1-7
Ancillary drive belt - Td4
86.10.03
Remove
1. Disconnect battery earth lead.
2. Remove engine acoustic cover if fitted.
+ ENGINE - Td4, REPAIRS, Cover -
engine acoustic - Up to 02.5 Model Year.
3. Remove underbelly panel.
+ EXTERIOR FITTINGS, REPAIRS,
Panel - underbelly.
4. Turn steering on RH lock.
5. Remove 3 bolts and RH splash shield.
6. Position LRT-12-163 to ancillary drive belt
tensioner, turn tensioner anti-clockwise and
release ancillary drive belt from pulleys.
7. Remove ancillary drive belt.
Refit
1. Ensure pulleys are clean and damage free.
CAUTION: Examine drive belt for signs of
wear. A drive belt with cracked ribs is
acceptable. A drive belt that has loose or
missing parts of ribs must be changed.
2. Use LRT-12-163 to hold belt tensioner off and
with assistance, fit ancillary belt. Ensure belt is
correctly located in pulley grooves.
3. Fit splash shield and tighten bolts to 10 Nm (7
lbf.ft).
4. Fit underbelly panel.
+ EXTERIOR FITTINGS, REPAIRS,
Panel - underbelly.
5. Fit engine acoustic cover if fitted.
+ ENGINE - Td4, REPAIRS, Cover -
engine acoustic - Up to 02.5 Model Year.
6. Connect battery earth lead.