Search results
-
Cosmetic for sun damage?
What are peoples thoughts in terms of a good polish? I tend to use Autoglym super resin polish, it's a lightweight polish: https://www.autoglym.com/super-resin-polish-1 Curious to learn about other good ones, like powershift I'm in the process of polishing my LR4 regularly to spiff it up. -
Toll-road RDIF sticker on LR4 windshield
This is true, but on a snowy cold morning I'm always thankful for the heater element... Different horses for different courses I guess! -
-
Nickname for LR4?
Also, on the Doc theme is a great British TV series called Doc Martin :-). He drives a Lexus but has many of the traits of Jeremy in that he's crotchety... No name yet but thinking about it! -
Question about Suspension Faults and Blowing out the lines
I'm sure you'll keep us posted :-). I'll cross this bridge when I get to it, first and foremost would be the timing chains! Thanks. -
Question about Suspension Faults and Blowing out the lines
I also used silicon on my o'rings; I left the car for about three and a half weeks while traveling and didn't notice any appreciable sagging; I have to think the valves are pretty reliable as they're not that complicated in terms of their operation (it's three solenoids). What do you think of... -
Suspension dropped while in traffic
Do the overnight test as mentioned by f1racer328; leave it longer if you can; that will confirm if there's a leak. I suspect however, as others have pointed out that this is just a levelling adjustment and you don't need to worry. There's no other reason for these to drop unless there's some... -
Good Used Buy
FWIW - Price seems consistent with midwest prices; 134K miles and age. It's certainly in nice condition. I just spent three weeks in the UK; there are so many L3's and L4's on the road I suspect prices are lower (didn't look but saw a few other Land Rover vehicles that appeared to be quite... -
Buying this 2015 LR4 Lux Pkg w/ HD Pkg, but am freaking out about the RUST! Should I walk?
Thanks for the update, good to hear. -
What kind of leak is this?
Thanks for keeping us updated; I have this job in my future so seeing the pictures provides some inspiration... I plan to do timing chains at the same time. -
What kind of leak is this?
Can you share the link so others can follow in your footsteps? Thanks. -
P0500 VSS OBD2 "A" circuit
I think I changed the front right (passenger side in the US) first; when that didn't work I changed the rear right; power of deduction! The cables were not that expensive so I purchased both front and rear at the same time. Front... -
P0500 VSS OBD2 "A" circuit
Yeah, it was the rear right sensor I believe; changing the sensor took probably 15 minutes so it's quite easy. -
Timing Chain tensioning issue
Thank you so much for the details, reading your comments makes me realize I still have a lot to learn before I tackle this project!... I see you also did the crossover pipes which I was also planning to tackle at the same time (makes sense since the valve covers have to come off!). -
Timing Chain tensioning issue
Can you comment on roughly how long it takes to do this job (chain replacement)? I have it on my radar for the fall! -
Suspension Fault — Temp Sensor?
Have you taken a look at your respective valves; there are three. One is situated in the front passenger wheel well; one is situated in front of the compressor and the third is on the rear driver side wheel well. I bought a new set of o'rings and serviced all three valves, I suspect this made... -
Suspension Fault — Temp Sensor?
I documented my journey in this thread: https://www.landroverworld.org/threads/2012-lr4-reluctant-to-lower-from-off-road-suspension-mode.44636/ I'm sure there were many issues that I ended up fixing along the way but the silver bullet was the firmware change from Hitachi to AMK. -
Suspension Fault — Temp Sensor?
Agreed on that front, I had many fault codes caused by the wrong RLM ECU firmware. The IID Tool fixed this. -
Suspension Fault — Temp Sensor?
Thanks for confirming the issue and resolution; I see this is a Hitachi compressor; I wonder if the AMK also does this (rhetorical question...). -
Wood panel door inserts
I have the same issue with the "wooden" panels, I figured if I wait long enough I'll stop seeing the issue!... I have removed the door card to fix a locking issue and observed how to remove this wooden trim but decided that was a project for another day, it looked easy enough though! I'm in... -
Long crank, no faults
Great - Thanks Jimmy; just never really paid attention to this change with direct injection engines so every time I kept reading the word coil I was scratching my head, I get it now :) - Thanks for confirming. Good luck by the way getting to the bottom of this issue; it would be great if it's... -
Long crank, no faults
Learning Curve for me here! Is this the coil? https://www.fcpeuro.com/products/land-rover-direct-ignition-coil-bosch-lr010687 -
-
-
