-
-
I would throw in changing the water pump as well as check the oil cooler (my 2010 LR4 had an awful leak from a gasket breach on that... -
powershift replied to the thread Parasitic drain on Main AGM Battery after Mechanic installed a High Output Alternator & 3-wire kit.I've also read about aftermarket alternator problems. But aside from that, if I left my rig from Thursday to Sunday while camping I'd...
-
powershift replied to the thread 2013 LR4 (v8) coolant leak.Did it overheat?
-
powershift replied to the thread Crazy to consider new engine in a 2016 LR4?.What year and how many miles?
-
powershift replied to the thread 2014 Land Rover LR4 SCV6 Hesitation/Shutter While Accelerating..
-
powershift reacted to RossN1999's post in the thread 2014 Land Rover LR4 SCV6 Hesitation/Shutter While Accelerating with
Like.
112k -
powershift replied to the thread positive LR4 experrience..
-
powershift replied to the thread 2014 Land Rover LR4 SCV6 Hesitation/Shutter While Accelerating.How many miles on it?
-
powershift replied to the thread LR4 Stainless Steel Brake Lines.I tried the fcperero pads that are said to be the same compound as Land Rover brand, but the mold for the material different so the...
-
powershift replied to the thread Alternator wire connection.It sounds like the alternator installed isn't working as well as you had hoped. How many miles did you have on the original?
-
powershift replied to the thread Misfires on one side 3L SCV6 2015.Its plausible that chain slack is causing a problem because the miss-fires could be timing related at the mechanical side with the...
-
powershift reacted to Land Rover Joe's post in the thread LR4 Stainless Steel Brake Lines with Like.
This image, however, is much better to communicate what I am currently facing, and I found it online. The point is that for the rear...
-
powershift reacted to Land Rover Joe's post in the thread LR4 Stainless Steel Brake Lines with Like.
A few more photos - the caliper paint I used. Note - this is nothing special and I have since learned that there are specialty kits for...
-
powershift replied to the thread Thought the front end structure was an aluminum casting.No I wouldn't expect magnesium, but it is light and strong and used in the industry. Some C5 corvettes had magnesium rims and there are...
-
powershift replied to the thread Thought the front end structure was an aluminum casting.The hood and tailgate are aluminum.
-
-
Loading…
-
Loading…
Latest posts
-
-
Transmission - Mechatronic Valve Body Sleeve (TZV500010) replacement - help!
- Latest: Land Rover Joe
-
-
-
