Search results
-
Replaced passenger mirror glass, now getting blind spot and cross traffic errors
Double check the electrical connector for the blind spot light in the mirror.- Rover Range
- Post #3
- Forum: LR4
-
2021 RR LWB skid plate
Don't forget the push pins. Three per side.- Rover Range
- Post #7
- Forum: Range Rover
-
2021 RR LWB skid plate
There should be covers like those at the tie rod ends.- Rover Range
- Post #5
- Forum: Range Rover
-
2021 RR LWB skid plate
There should be covers that run down both sides of the vehicle ( underneath). Those are just plastic.- Rover Range
- Post #4
- Forum: Range Rover
-
2021 RR LWB skid plate
The OEM skid plates are aluminum. There are two sections. Engine and transfer case coverage. This is the front. 2nd one is for the transfer case.- Rover Range
- Post #2
- Forum: Range Rover
-
Rough idle and extreme smoke from exhaust following coolant system replacement
Coolant hose at the throttle body, connected to the wrong spot.- Rover Range
- Post #2
- Forum: LR4
-
Recommendations for cargo net/divider for 5 seater 110
Sorry. This is just the upper half.- Rover Range
- Post #2
- Forum: Defender L663 (2020 - Present)
-
Air in coolant that just won't go away
What is the actual concern with the vehicle? May not be anything wrong.- Rover Range
- Post #7
- Forum: LR4
-
HD package retrofit
As with any locking differential. When locked. Whatever direction you turn one of the rear wheels. The opposite turns the same direction.- Rover Range
- Post #19
- Forum: LR4
-
-
Can anyone ID this plug on the back of a SCV6? (Solved)
Like TexanRover said. Connector not used in your application.- Rover Range
- Post #3
- Forum: LR4
-
My posts now need approval?
Thank you for all that you do. Everyone here is civilized and show respect to all the members.- Rover Range
- Post #4
- Forum: Site Comments, suggestions, and questions.
-
2012 LR4 continued charging issues
The pins are labeled on the connector. The voltage should be the same on both sides of the battery monitor, on the negative cable.- Rover Range
- Post #19
- Forum: LR4
-
2012 LR4 continued charging issues
In a previous post. I thought it was determined to have high resistance in the battery monitor?- Rover Range
- Post #17
- Forum: LR4
-
2012 LR4 continued charging issues
Looking into the connector. Connector has 96 pins. Pin 95, 2nd one in. On the bottom right side.- Rover Range
- Post #16
- Forum: LR4
-
2012 LR4 continued charging issues
Did you change out the negative battery cable?- Rover Range
- Post #13
- Forum: LR4
-
2012 LR4 continued charging issues
Yes. Sorry. pic wouldn't upload. Wire is blue, with a brown tracer.- Rover Range
- Post #11
- Forum: LR4
-
2012 LR4 continued charging issues
The PCM has two connectors. The circuit you're checking is in the bigger connector. Check the resistance from Pin 95 to the alternator connector. This is the PCM connector-looking into it.- Rover Range
- Post #9
- Forum: LR4
-
2012 LR4 continued charging issues
Check the resistance of the wire, from the PCM to the alternator. I'll need your VIN to let you know what pin on the PCM.- Rover Range
- Post #6
- Forum: LR4
-
2012 LR4 continued charging issues
The wire may have high resistance when hot.- Rover Range
- Post #4
- Forum: LR4
-
2012 LR4 continued charging issues
You may have a broken signal wire from the PCM. It is the single grey wire that plugs into the alternator.- Rover Range
- Post #2
- Forum: LR4
-
LR4 possible alternator issue
Check the battery monitoring wire that connects to the positive battery cable. There's a fusible link in the wire that can burn out.- Rover Range
- Post #3
- Forum: LR4
-
SCV6 Engine chatter/knock
Tensioner failures are rare. High pressure pumps can fail and become noisy. With the engine running. See if you can put your hand on the pumps and feel for an abnormal knocking.- Rover Range
- Post #7
- Forum: LR4
-
SCV6 Engine chatter/knock
Sounds like a collapsed timing chain tensioner. Yeah. Don't keep driving it.- Rover Range
- Post #5
- Forum: LR4
-
Down shifting in 4L?
1st gear and 4L may be too low, while in sand mode. Take it out of sand mode and try shifting to 1st.- Rover Range
- Post #2
- Forum: LR4
