Search results
-
97 Discovery SD ... 115k miles
After alot of thought I am selling my 97 D1. The amount of driving I have to do has almost doubled since taking my kid to daycare, so milage is killing me. Time to look for a car :( It is light green..I guess willow green, not quite sure of the specific name. - 115k miles. All... -
Wheel Bearings going bad?
Does anyone know the sound of a wheel bearing going bad? I think mine is on its way out. I didnt hear anything untill I had been driving for around 45 min. As I was pulling into my drive going about 5 and I started to hear a grinding sound comming from one of the wheels. I know it is not... -
Exhausting
So awhile back my exhaust had gotten bent. Pushed in and almost pinched just behind the rear axle. I have been looking at different ideas and came up with this. Instead of replacing the pipe and resionator, (which was rusting out anyways) I had my local exhaust shop chop it off and weld on a... -
Front end clunk at takeoff
So I have noticed that when I slam on the gas from a dead stop there is a clunk sound from the driver side(ish). It sounds like it is comming from the steering area, maybe a worn rod or something? When I start out slow there is no clunk. I have done some searches on this but I cant tell... -
Gotta get em seperated! front rotors
Have an issue here. I am doing an upgrade on my front brakes to EBC pads and rotors. I got the whole system apart including bolts but cant get the rotor seperated from the hub. I have the RAVE cd and a Haynes manual and both dont seem to be of any help as to how to seperate this thing... -
Exhaust chop
So I was looking at the exhaust the other day and noticed that there is a unnatural bend in it by the muffler restricting flow. Must have gotten bashed. My question is ... If I cut off the muffler, do I need to keep it away from the back tire to keep it from heating up the tire? I will need... -
Bent Exhaust
I just noticed the other day that the exhaust pipe leading to the muffler is bent way out of shape. It is at the point by the back tire. My question is....I just hack off behind the bent part and run with no rear muffler right? (well I expect the sound to be like the dukes of hazzard of... -
Tire Pressure BFGs?
I was wondering.... To anyone out there running BFG's on their daily drivers. What Pressure are you at front and back? The reason I ask is because on the tire it says up to 80lbs! this seems abit high to me. I currently am at 40lbs on 245s and they look abit low. N8 -
hi lift mount options
I have been looking at different options to mount my jack. I dont have a roof rack and want to keep it off the ARB untill I get more heavy duty springs to compensate for the winch and the jack. Has anyone mounted their hi lift on the rear bumper? It is steel and should hold the weight right? -
Looking to buy...
Is anyone out there selling a spare tire Safari gard Hi lift mount? Or know of a place that sells something similar? Tried to order one directly but apparently they have stopped making them and are out of stock. -
crankshaft pulley removal
Amidst working on getting off the timing chain cover I am stuck on the crankshaft pulley. I have the RAVE cd and have found the pulley section. It says to have someone hold a striaght edge something or other (perhaps a screwdriver) in somewhere to keep the crankshaft from turning when... -
coolant leakage D1
After driving for a few hours I herd a gurgerling sound comming from the tranny area. Temp got really high, pulled over and noticed the truck peeing from the back area of the engine all over the steering damper and stuff. Had it towed home. Blah Could this be the rear seal perhaps? All... -
Canoe help me out
I'm looking on getting a canoe this summer. I have seen Yakima and Thule "racks" and not sure if the rain gutter towers are high enuff to clear the roof. Anyone running any of these? Any other options out there or how is your canoe secured? Pics would be cool too! thx -
ARB Compressor
I have been looking everywhere and I cant find a wiring diagram for an ARB compressor (RDCKA) Does anyone know where I can find one? I cant get my compressor to fire up. Any one have any ideas of this too? Thanks -
Painted rims
So I had alittle time and rustolium on my hands today. I'm pretty happy with the outcome... -
What are these for?
I have been seeing this around on some Discos. The 2 cables comming the roof rack down to the grille guard? What is the point of this? -
02 Sensor location
Engine threw a code the other day....blah Had it read yesterday and it came out as P 150 02 sensor malfunction My question is, which one is it? Passenger side, before or after the cat converter? If anyone has a pic of the location that would be very helpful! Thanks! 97' Disco 1 -
Alternator replacement
I donno if anyone caught this in my last alternator post but, I herd there is a GM replacement that replaces the OEM directly. Is this true? 97 Disco 1 -
Strange alternator sound??
ok So I pull up into my garage today, put it in park, turned off the radio... was just about to turn off the truck and noticed a weird sound. It's like the sound when you turn a car that doesnt have enuff power steering fluid in it but not as loud. Wheels straight, it definatly sounded as... -
ome steering stabiliser
Got a quicky one here I was sent the wrong OME stabiliser by mistake. It is the one for a defender, part # OMESD32 I have a 97 Disco 1 Will the one I have work? or do I need to go to the correct one which is (OMESD11) Thanx -
ARB Locker question
I'm fairly new to the whole locker bit. What I want to know is; what is the advantage of having air lockers over the standard differential lock? Thanks for any input -
Aux Fans On?
Hey guys Got another question. I haven`t driven my Rangie for about a month. When I start the thing up the two Aux fans come on, the ones in front of the radiator. Is this normal? I don`t remember them comming on before. I let the truck run for 15 minutes and they stay on till engine is...- N8tabasco
- Thread
- Replies: 3
- Forum: Range Rover
