Search results
-
C
Remove and replace supercharger snout
You just possibly saved my life!, I started this job removing the SC 2 days and was at a loss when I couldn't get the SC up and out, so I put it all back together. I want to try again in hopes to get to the isolator changed out. Thanks for posting the PDFs.- ColorofKris
- Post #5
- Forum: Range Rover
-
C
Brunswick Ga
Anyone local to the area? Just moved here and don't know where to get work done on the rover or go offroading. Anybody native?- ColorofKris
- Thread
- Replies: 0
- Forum: East Coast
-
C
Oil Pan gasket
2003 Disco II 4.6L with 99600 miles (just saying) Hey was looking to change out my oil pan gasket, my grandpa is a retired mechanic so hes gonna give me a hand replacing some of my bad gaskets. I have been researching and have seen alot of people say you have to lift out the engine a bit in...- ColorofKris
- Thread
- Replies: 3
- Forum: Discovery
-
C
Intense Shaking in idle/ flashing engine light
After reading into it more and such I agree its not o2 sensors, im working and moving today and the remainder of the week so dont have much time to work on it :( . Was debating on taking it to a professional to have it checked.- ColorofKris
- Post #3
- Forum: Discovery
-
C
Intense Shaking in idle/ flashing engine light
2003 Discovery Series II 97k Got into my truck this morning to go to work and when I turned it on it started shaking intensely and the engine light started flashing.(have not checked any codes or anything, havent been home) Yesterday had put cross member spacers on (Recently replaced front...- ColorofKris
- Thread
- Replies: 2
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
Yesterday I installed a new drive shaft, and the spacers for the cross member. Today i turned on the rover and it started shaking and the engine light was flashing, I'm on my way to work (not driving) so i don't have a chance to further look into it. Any where i should start looking? Spark...- ColorofKris
- Post #22
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
Valve Cover gaskets ordered, having a friend help me with the job, also ordered a transmission filter kit, all new u joints and ball joint for front drive shaft, and also have cross member spacers ordered. Cant wait to get this all done. Next up ordering a new top to the air intake box...- ColorofKris
- Post #20
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
Sounds good, Ill message you my phone number. I work tomorrow and Sunday if you like to call me Monday we can talk. I would much appreciate it!- ColorofKris
- Post #19
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
So the head gasket seal, valve cover gasket and intake gaskets need to be changed. also the air box cover needs to be changed because all of the clips are broken. Parts have been ordered for the front prop shaft.- ColorofKris
- Post #17
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
Some other info only knocks when hot, once the engine is hot it continues even in idle.- ColorofKris
- Post #16
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
New issue, knocking coming from the mid right side of the motor. Place i took it to wouldnt even look at the truck until it was fixed. What are some common issues in the 4.6L that create the knocking that I should look into first? Should I seek professional help immediately or is there something...- ColorofKris
- Post #15
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
While I order the parts for the Front prop shaft should I rebuild the rear as well? Also any advice or alternatives for the cross member issue with the lift? I will try to post up some photos tomorrow of the rover.- ColorofKris
- Post #13
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
Okay sounds good, I would greatly appreciate that.- ColorofKris
- Post #12
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
Okay, I will not go to rover. you have talked me out of it, there is a very good tire shop local to the area, fair priced to. I am going to order the remaining drive shaft parts Thursday when I get paid. Im working all day today and tomorrow, but im off Thursday if i can pass my number onto you...- ColorofKris
- Post #10
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
Found an issue that isnt a big deal at this very moment but the lift that was on the truck prior o the purchase is of unknown height, my guess is between 2-3 inches. When jacked up today at full articulation the drive shaft made contact with the cross member, My jeep had a similar issue with...- ColorofKris
- Post #8
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
And I need an alignment because my steering wheel is pulling hard to the left. takes two steady hands to drive- ColorofKris
- Post #7
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
Not sure on either the tire pressure nor the prior rotation methods, Ive literally had the truck a week so im not even sure on previous maintenance. The remaining u joints I planned on replacing once I had the money because they weren't in the best condition, but they are in a far better working...- ColorofKris
- Post #6
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
Thank you so much! I was actually driving on the high way when I got your message this morning, I was on the way to a friends with the tools and knowledge to check everything out. First and for most you were right about the drive shaft, 2 of the bearings on the back side of the front shaft blew...- ColorofKris
- Post #4
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
Today On my way to work I started getting a squeeking noise from the front left side of the truck, it got progressivly worse through out the evening, It seems to be coming from the driver side wheel (area), after doing some research and paying attention while I drove I noticed some uneasy down...- ColorofKris
- Post #2
- Forum: Discovery
-
C
2003 disco, newb looking for some help!
Hey Folks, so Im new to the whole forum and maintenance rover world. I just got a Land rover Discovery Series II, 2003 with 96k on it, 4.6L Se edition. I picked it up last week it needs a little bit of work. The other day its started leaking, after looking through the engine bay I found that my...- ColorofKris
- Thread
- Replies: 21
- Forum: Discovery
