MikeLi
Full Access Member
- Joined
- Sep 18, 2008
- Posts
- 59
- Reaction score
- 0
They are thick hard plastic with a chrome finish.
New Custom Intake Tube
- Thread starter MikeLi
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I got to change a new throttle body tomorrow,that is why I asked.I might as well retrofit your invention,first i have to find out if i need any lubricant or sealant under that new gasket and if any locktite is needed for those 4 bolts...hmmm
Mhaise57
Full Access Member
- Joined
- Jun 21, 2009
- Posts
- 234
- Reaction score
- 4
Mike, That custom intake job still working good for you?
MikeLi
Full Access Member
- Joined
- Sep 18, 2008
- Posts
- 59
- Reaction score
- 0
It works just fine. No issues at all.
Mhaise57
Full Access Member
- Joined
- Jun 21, 2009
- Posts
- 234
- Reaction score
- 4
Well I have decided to attempt you intake modification but I noticed there is a hose connected to the factory intake just past the accordian part of the intake. Right before the throttle body housing. What did you do to compensate for this?
MikeLi
Full Access Member
- Joined
- Sep 18, 2008
- Posts
- 59
- Reaction score
- 0
I put in a breather for the valve cover. Put they do sell a tube connection kit for it. You'll have to drill a hole and install a ****** so the hose can go in the same place.
