whiskeynipple
Full Access Member
- Joined
- Apr 24, 2006
- Posts
- 97
- Reaction score
- 0
I read the post on getting the CDL to work but cannot find a thread that addresses the issue I have - cannot get the transfer case out of high range - the diff lock engages and disengages just fine. - but no nutrual or low range ( it will not move forward)
What I have tried:
-brute force (not enough to bend things)
-pulled the console - drilled the rivets - removed boot for shifter -
sprayed lithium grease and bolt remover - nothing
removed linkage (linkage works fine)
-checked the rave manual and it seems that if I remove the 6 bolts that houses (no.3) the 'high-low selector shaft and lever' (no.4) I will only gain (small) access to 'high-low selector fork and shaft' (no.5) which does'nt seem like that will help.
any thoughts?
thanks,
What I have tried:
-brute force (not enough to bend things)
-pulled the console - drilled the rivets - removed boot for shifter -
sprayed lithium grease and bolt remover - nothing
removed linkage (linkage works fine)
-checked the rave manual and it seems that if I remove the 6 bolts that houses (no.3) the 'high-low selector shaft and lever' (no.4) I will only gain (small) access to 'high-low selector fork and shaft' (no.5) which does'nt seem like that will help.
any thoughts?
thanks,
Last edited: