Nudge bar update
- Thread starter land crzy
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
davez26
Full Access Member
- Joined
- Dec 15, 2005
- Posts
- 357
- Reaction score
- 2
Instructions @ ownerinfo.landrover.com.
Difficulty is based upon ability.
Sorry so short. meeting going to.
Difficulty is based upon ability.
Sorry so short. meeting going to.
GrahamWelland
Full Access Member
- Joined
- Dec 27, 2008
- Posts
- 95
- Reaction score
- 0
Are you looking at the tubular steel bars or the plastic A bar?
I originally had the boxy bar - it requires drilling through and mounting against the front bumper so some limited body work is required. I changed to the tubular front end with winch and that leaves the bumper intact (I had to get another one since my other one was drilled through!) and everything mounts underneath and on to the frame.
I originally had the boxy bar - it requires drilling through and mounting against the front bumper so some limited body work is required. I changed to the tubular front end with winch and that leaves the bumper intact (I had to get another one since my other one was drilled through!) and everything mounts underneath and on to the frame.
Where do you find the exact location on the bumper to drill the holes for the tubular frame? In the installation manual it just says 70mm without indicating how far from the ridge it should be (if you have the instructions handy you'll know what I mean).
