M
mge_1
Guest
Took it to Advance Auto this morning and had the codes scanned.
Now the reason why I brought it in to get it scanned because the "Service Engine Light" came on. No flashing just straight up turned on.
I did notice our Disco (80K miles) is struggling and hesitating when I am around 60-70mph on the highway on a uphill. Other than that everything else seems to be ok.
Here are the results.
P0734: Gear Ratio 4 Incorrect
P0733: Gear Ratio 3 Incorrect
P1175: Manufacturer Contrl. Fuel Air Metering
P0172: Manufacturer Contrl. Fuel Air Metering
P0174: System Too Lean (Bank 2)
P0171: System Too Lean (Bank 1)
I had them erased the codes and the "Service Engine Light" is now gone. But I am sure the problem is not fixed and would like to get some feedback so I can get it resolved soon.
Any feedback would be much appreciated. Thanks.
Marc E.
Now the reason why I brought it in to get it scanned because the "Service Engine Light" came on. No flashing just straight up turned on.
I did notice our Disco (80K miles) is struggling and hesitating when I am around 60-70mph on the highway on a uphill. Other than that everything else seems to be ok.
Here are the results.
P0734: Gear Ratio 4 Incorrect
P0733: Gear Ratio 3 Incorrect
P1175: Manufacturer Contrl. Fuel Air Metering
P0172: Manufacturer Contrl. Fuel Air Metering
P0174: System Too Lean (Bank 2)
P0171: System Too Lean (Bank 1)
I had them erased the codes and the "Service Engine Light" is now gone. But I am sure the problem is not fixed and would like to get some feedback so I can get it resolved soon.
Any feedback would be much appreciated. Thanks.
Marc E.