Rotor wear limits for RR Sport Supercharged 5.0L 2012

Discussion in 'Range Rover' started by Nik Laskaris, May 30, 2018.

  1. Nik Laskaris

    Nik Laskaris New Member

    Age:
    58
    Posts:
    1
    Likes Received:
    0
    Joined:
    May 30, 2018
    Location:
    Saudi Arabia
    In the Middle East and need some assistance on rotor thicknesses, cant find the wear limits on the LR site. Pretty sure I got led astray by a RR dealer as this was a used car.
    Was told I needed to replace rotors and pads on front and rear and was charged $USD 2,200. Kept the parts and measured the fronts at 30mm and the rears at 19.5/20 on the fronts (may have that backwards). In reading specs for other RRs I see this is new thickness.

    Anyone know a link where I can confirm wear limits?

    Nik
     
  2. joey

    joey Custom Rover Accessories Staff Member

    Posts:
    9,708
    Likes Received:
    40
    Joined:
    Jun 28, 2004
    Normally on Rovers if you have a warped or grooved rotor, you replace them. As far as Specs, someone else may be able to speak to that. But if they look good and are not grooved or warped (i.e. you feel a shimmy when applying brakes) just change the pads.
     
  3. Schlepper

    Schlepper Member

    Posts:
    11
    Likes Received:
    1
    Joined:
    May 23, 2018
    Location:
    over there
    Front limit 27 mm. New = 30 mm
    Rear limit 17 mm. New = 20 mm
     

Share This Page