Recent content by DTXRover
-
D
Front brake pads on 2013LR4 funny looking weight?
I've been using Brembo Rotors as they are machined well and painted with a gloss gray that I suspect could be considered anti-dust, and for pads have had good luck with Akebono ceramic pads. The pads seem to generate less dust and have the highest friction rating of GG that I've found, and have... -
D
Front brake pads on 2013LR4 funny looking weight?
The placement of the cylinder weight should be mounted in the outer position on either side and towards the top of the rotor when mounted on the vehicle. See the attched picture, while it's not the best picture, the OEM pads are labeled accordingly. -
D
AC Compressor, Drier, & Expansion Valve Parts 2022-07-21
Good source for AC Compressor, drier, and expansion valve. Lowest pricing I found in Dallas Fort Worth Texas area and online. https://techchoiceparts.com/- DTXRover
- Resource
- Category: Example category
-
D
AC Not Blowing Cold...Sometimes
When replacing the AC Compressor did you also find it necessary to replace the drier and expansion valve as is typically recommended by the compressor mfgs? Am having the same/similar issue and both the drier and EV are difficult to access and replace and wondered if replacing just the... -
D
NGK vs Bosch Ignition coils
I have a 2010 Rover Sport and recently changed the spark plugs and replaced the NGKs with NGKs at around 140K miles. I noted that the Coils were the original Bosch FoMoCo coils (see pic) and they were working fine and continue to work good. I watched a few YouTube videos and noted that others...
