gsxr's latest activity
-
gsxr reacted to Quijote's post in the thread LR4 Transmission Fluid Change: Pan Swap Option with
Like.
Thanks guys. My plan was not to apply the RTV (silicone RTV, FWIW) as a gasket, but rather apply and scrape smooth with a plastic... -
gsxr reacted to txfromwi's post in the thread LR4 Transmission Fluid Change: Pan Swap Option with Like.
I would some 3000 grit Emory cloth. Lube Locker gasket is awesome and will be highly forgiving of surface imperfections.
-
gsxr reacted to Quijote's post in the thread LR4 Transmission Fluid Change: Pan Swap Option with Wow.
Well, I am convinced that what I am seeing is not dirt and gunk, but rather some kind of pitting. It feels squeaky-clean when I run my...
-
gsxr replied to the thread LR4 Transmission Fluid Change: Pan Swap Option.Looks like pitting or corrosion of some sort. I'd try lightly scuffing with a Scotch-Brite pad for grins, but if it's smooth, don't...
-
gsxr reacted to GunsAndRovers's post in the thread Multiple repairs on a 70K miles 2013 LR4: what can I expect next with Wow.
If it makes you feel any better, here's what I've replaced on my 2011 LR4 with one additional year of ownership than you: 1. Rear sway...
-
gsxr reacted to david cook's post in the thread Multiple repairs on a 70K miles 2013 LR4: what can I expect next with Like.
Thank you all for your valuable and timely comments. Somebody mentioned the control arms, and those were replaced. We don't drive much...
-
gsxr reacted to MarcusTriton's post in the thread Multiple repairs on a 70K miles 2013 LR4: what can I expect next with Like.
Don't sell it. The year of the 2013 LR4's is, in my opinion, the finest machine out there in the LR4 line. I bought a 2012 LR4 with 101k...
-
Engine temperature sensors are designed to work when submerged in liquid (coolant). If it has no coolant left in it or you have a lot...
-
gsxr reacted to Jimmy Brooks's post in the thread Suspension noise (possibly lower control arm) with Like.
Worked like a charm except I used a slightly different one. https://a.co/d/08TQtKVK Make sure to screw the ball joint bold down to...
-
gsxr reacted to Jimmy Brooks's post in the thread Suspension noise (possibly lower control arm) with Sad.
It wasn’t the LCAs… so many words I want to say but can’t, that job is a pita and I’d be lying if I said I wasn’t pi$$ed off that my...
-
Well, mine sounds like a diesel too.
-
I attempted this with a cheap aftermarket piece but couldn’t get a good seal with the ends. They’re that shrink-plastic and when I tried...
-
I've dealt with the same. It helps to raise the discharge hose outlet above the height of the bleed screw. I believe air can siphon...
-
Teflon plumbing tape works great too.
-
I used a tip once that was helpful. A tiny bit of grease on the bleeder threads and then screw it into the spot you need it to get fluid...
