Recent content by howardduff
-
H
2015 LR4 HSE LUX HD package for sale
I have lowered the price to $26k and have pictures on cars.com. Please take a look. Thanks- howardduff
- Post #2
- Forum: Selling!
-
H
1-Yr Check-in and Trouble Code Rant
I have a 2015 delivered Dec of 2014. Had the P0089 code two different times. The first time under warranty. It took the dealer several weeks to to correct. Replaced the both sensors and finally got it fixed. The second time it happened it was out of warranty so had an indy shop replace the...- howardduff
- Post #24
- Forum: LR4
-
H
New Recall Alert : Fuel System
You can get reimbursed I had mine done at the dealer iit took three tries the first time I filled up on my way home parked on a slightly slope in the driveway and found a puddle of gas under the car called tge dealrer and they sent a flatbed. They dropped the tank again and found...- howardduff
- Post #192
- Forum: LR4
-
H
Normal Coolant Level Drop?
I had the bleed screw leaking on my lr4 the one on the right side just adjacent to the battery I replaced that and my slow leak went away I was able to get a brass one on amazon for about $15.00 I tried the dealer and they wanted $100 for the hose with the plug- howardduff
- Post #7
- Forum: LR4
-
H
2015 LR4 HSE LUX HD package for sale
Located in the Cleveland Ohio area. I have my Causeway Grey LR4 for sale. 78 k miles, new rear brakes and calipers, front brakes about half worn. (5) Goodyear Eagle Sport run flat tires rotated about every 6 k miles. Excellent condition well maintained, see Sticker for options below...- howardduff
- Thread
- Replies: 2
- Forum: Selling!
-
H
Bearing
I had both front bearings go out on my LR3 after going thru a puddle at a sand stone quary. When I replaced them they didn't seem to be sealed bearings. It isn't a difficult job but you need a torque wrench that goes to 250 nm if I remember correctly. There is a video on the Atlantic British...- howardduff
- Post #3
- Forum: LR4
-
H
Engine light when fuel level down to a few gallons Err Cd is fuel system performance
I have had the P0089 fault several times on my 2015 LR4. The first time was under warrenty about 18K and they had it at the dealer for about 2 weeks. I believe they replace the left fuel rail high pressure fuel sensor. Never did get any paper work. It did it again about 55k miles. This time...- howardduff
- Post #10
- Forum: LR4
-
H
Totaled? Need advice after accident
I have a 2015 HSE LUX with 67800 mi. that I am thinking of selling. It has the HD package, trailer tow package, cold climate package, seven seats, Casway Gray, 19 in. wheels, it needs a new battery for the stop/start. PM me if you are interested, I live in Cleveland, Ohio. It was in an...- howardduff
- Post #6
- Forum: LR4
-
H
Lower Control Arm ball-joint
Atlantic British has a video on how to do the bushing replacement without using a press. I am not sure if they replaced the ball joint. You might take a look at the video.- howardduff
- Post #6
- Forum: LR4
-
H
Windshield
Just for information. I don't know about your 2011 vehicle but newer rain sensing is done by a pad attached to the windshield. We had the windshield replaced on my wife's 2014 LR2 and the rain sensor was intermittent. Called the company back and they replaced the pad and it worked perfectly.- howardduff
- Post #14
- Forum: LR4
-
H
In need of the most random part ever. Any ideas?
if it is a rubber gasket you should be able to buy a piece of rubber and cut one out. Can't you use the opposite side as a template. If it plastic the a 3D printed one should do an excellent job.- howardduff
- Post #14
- Forum: LR4
-
H
2016 LR4 w/32k miles - replace all brakes at same time?
If you are inclined to do your own work. You can remove the rotor and have it turned at a local auto parts store and reuse it. It would make sense to install new pads. If you have a NAPA auto parts store or any other parts store you should be able to pick up new pads and replace them. Make...- howardduff
- Post #10
- Forum: LR4
-
H
LR4 Calipers
When I removed the front caliper bolts on my 2015 LR4 only one had the rubber bushing. I believe it was the top bolt. I understand that if you don't put that bolt into the same position the calipers will not move freely and you it will produce excess heat and premature wear. Look at thread...- howardduff
- Post #6
- Forum: LR4
-
H
LR4 Calipers
When I removed the front caliper bolts on my 2015 LR4 only one had the rubber bushing. I believe it was the top bolt. I understand that if you don't put that bolt into the same position the calipers will not move freely and you it will produce excess heat and premature wear. Look at thread...- howardduff
- Post #5
- Forum: LR4
