Recent content by LR3GuyJoe

  1. LR3GuyJoe

    Front main seal replacement V8?

    Just rolled over 200k miles on the rover and has developed a leak at the front of the motor. I think it's the front main seal. Have holiday time next week and would like to get it taken care of has anyone tackled this? Is pretty straight forward? Looking at the parts catalog photos it looks like...
  2. LR3GuyJoe

    Review Camera install

    Would anyone be interested in one of the GVIF boxes for about $320?
  3. LR3GuyJoe

    OEM winch

    Plus there are alot of pieces to the OEM one. You'd really better off with Rays or one like it.
  4. LR3GuyJoe

    Anybody from New Orleans?

    I just moved to nola about 4 months ago. As far as I know there isn't an independent LR shop, but I haven't looked around to hard. I had mine in for some warranty work at the local dealer and they are decent.
  5. LR3GuyJoe

    Review Camera install

    Yeah thats the one, not sure about that site tho... I'm going to give the vendor some feedback this week. I'm not sure on the price I'll find out and get you all the info when I do. You need a seperate "gnet/gvif" box for it to work with the factory nav. From what I understand the box is...
  6. LR3GuyJoe

    Review Camera install

    Heres a few night shots. No extra lighting With backup lights on And heres a link to a video http://www.flickr.com/photos/joenorth/4335880961/
  7. LR3GuyJoe

    Review Camera install

    I'll try and get some night shots tonight
  8. LR3GuyJoe

    Review Camera install

    Some more...... And a link to a video of it in action
  9. LR3GuyJoe

    Review Camera install

    Rear view Camera install A company in the UK was kind enough to send me over this to try out. Its a rearview camera that takes the place of one of your license plate lights. It was a fairly easy install the hardest part was getting the wires through the rubber boot between the tailgate and...
  10. LR3GuyJoe

    Air Jack Exhaust **** / Jack Adaptor

    I've got one from a different source and haven't had any issues. It's not ment to be left in, you only use it to fill the jack then take it out. Thats done with the engine just at idle.
  11. LR3GuyJoe

    Recovery Points?

    Yeah its pretty nice but I can only imagine that the tounge load rating on that has to be a lot less than the factory hitch since it's much farther from the moment than the factory hitch.
  12. LR3GuyJoe

    LR3 90k dealer visit

    For warranty, check your sunroof rails for cracks and also if your gas struts aren't lifting the tailgate like they use to get them to replace those. For your non-warranty items. I'd say do the filters your self and buy them online the pollen filter is pretty expensive from the dealer. takes...
  13. LR3GuyJoe

    Recovery Points?

    I'd recommend using the recovery point behind the cover on the rear instead of the hitch/shackle adapter. First reason being the hitch hangs down so low and at an akward angle that its pretty prone to getting hung up on stuff. Second reason being for safety, what are the load ratings on...
  14. LR3GuyJoe

    Glazing Axles..

    maybe but his dealership did recommend him to get his axles "glazed" sounds like the sort who would recommend someone needing a new muffler bearing ;-)
  15. LR3GuyJoe

    Glazing Axles..

    The LR3 doesn't have brake drums. They have a drum inside the rear brake disc for the e-brake. This sounds more like the dreaded sticking of the EPB (electronic parking brake). I doubt that it was out of round, my bet is your epb was sticking and when they resurfaced the drum part, it took away...

Latest posts

Forum statistics

Threads
36,280
Posts
218,288
Members
30,501
Latest member
gvillalongo
Top