Recent content by Phill
-
2008 lr2 rear diff Bearing replacement and seals
not sure about the pinion bearing, reckon that might need special tooling or at least careful set up but the seal are relatively easy, just make sure you checkout the condition of the bolts going through the rear arms, mine were rusted fast and required me to order new bushes, bolts, nuts/... -
08 LR2 rear strut removal/replacement/ need help...
Just make sure you disconnect the abs sensor before you remove the strut, fairly straight forward job to remove the strut, make sure you mark up everything to replace in the same position, might think about new rubber cushion/ bottom pad for springs, they can get messed up when removing springs... -
Car doesn't start sometime in cold weather
have you tried doing the two stage start up, ie push start button but don't put foot on brake, then repeat with foot on brake to start. There are others over here that swear by a extra earth wire from battery to starter ( you can find youtube videos on this) I have a calix battery charger wired... -
Headlight Replacement Question LR2 2014
yes that is the amps, check to see it has blown, sry about the delay in replying was working yesterday. -
Headlight Replacement Question LR2 2014
Fog lights are not in the headlight cluster, do you have xenon bulbs. Not sure about the American set up but on my European f2 the headlight cluster contains, sidelight, low beam and xenon high beam. It would be strange for both high and low beam to go wrong at the same time. Have you checked...
