Search results
-
Baja Designs LP6 Pro LED Auxiliary Light Pod for LR4
Tribe, Since there isn't anyone who has posted on the Forum about this, I thought I would would share my experience and thoughts about the Baja Designs [BD] LP6 Pro Auxiliary Light Pods (Universal) installation and performance. Bottom Line Up Front: Attached here are a couple photos about the...- Land Rover Joe
- Thread
- Replies: 10
- Forum: LR4
-
AMK Suspension Compressor Replacement and Rebuild
Wrapping up this thread for me - here are some photos of the (finally) rebuilt, cleaned / polished, and refit compressor ready for the next big adventure. This has the new dryer beads in it but all the original (installed in 2019) mounting hardware which could be replaced if I could find new...- Land Rover Joe
- Post #22
- Forum: LR4
-
LR4 Seat Covers
And to follow up @scapistron (if it helps and I didn't actually know this until the M&M seat covers got installed): the M&M set comes with a matching center consul cover too.- Land Rover Joe
- Post #20
- Forum: LR4
-
LR4 Transmission Calibration (adaption clearing) after service
@powershift : You are absolutely correct: That is one of those odd things on this truck. I have been thinking the same thing - that a robust intercooler, maybe one just dedicated to the transmission with its own electric motor/pump, would be an improvement. Right now, the transmission...- Land Rover Joe
- Post #10
- Forum: LR4
-
LR4 Transmission Calibration (adaption clearing) after service
Back to the transmission reset values. Watching the shifting and other rates over a whole range of driving conditions made me realize that the issue that I had thought was poor shifting is probably something closer to throttle controls. The annoying thing that has been bothering me for a long...- Land Rover Joe
- Post #8
- Forum: LR4
-
LR4 Transmission Calibration (adaption clearing) after service
Tribe, I wanted to follow up with this thread and where I ended up with resetting the transmission values. BLUF: I didn't. I wanted to see how things went after several weeks of running the truck (in generally slow stop-and-go traffic) and then with my shake-down test drive which included...- Land Rover Joe
- Post #7
- Forum: LR4
-
has anyone upgraded to this metal tranny pan?
Just did this service in February with the Atlantic British source parts (Item: ATFCKOMEWFL; price: $419.95)...apparently they are actually from Brit Part. There are lots of videos and information about this ZF service (in my case the 6HP) and the only issue we had was with the gasket, which is...- Land Rover Joe
- Post #5
- Forum: LR4
-
LR4 Seat Covers
@M32H32IS , They are snug but that is because of all the straps and such. There are two kinds of cinching straps - velcro and tension buckle. I don't like the velcro much - the OEM seat covers had velcro fasteners and they got pretty beat up, especially after washing. The photos below show...- Land Rover Joe
- Post #19
- Forum: LR4
-
-
-
LR4 Seat Covers
The Melville and Moon Seat Covers are on - front seats...- Land Rover Joe
- Post #15
- Forum: LR4
-
-
Showoff Your LR4
Shake Down Test Drive after services and build....- Land Rover Joe
- Post #2,181
- Forum: LR4
-
O2 Sensor Identifications - and intermittent CAT code troubleshooting
I didn't have any leaks or faults but had four broken exhaust manifold bolts...which were a real pain to extract (sent them into a machine shop).- Land Rover Joe
- Post #4
- Forum: LR4
-
Oil Filter O Ring Pinched
Thanks @f1racer328 ! Funny enough, and you can't make this up, Dave on his Youtube channel Dave's Auto, just released yesterday before I posted (in what looks like some sort of paid advertisement), another oil analysis lab he allegedly uses - "Speed Diagnosis dot com". You can see his pitch...- Land Rover Joe
- Post #8
- Forum: LR4
-
Please help ID some wires under the hood . . .
Can you take a picture? There is a battery maintainer thing which is used when the vehicle is shipped and that confuses everyone - it just dangles and looks like a missing connection.- Land Rover Joe
- Post #3
- Forum: LR4
-
Oil Filter O Ring Pinched
@f1racer328 - So when I first bought the truck (2010), and for about the first five years (2015), I ran engine oil and coolant analysis through Polaris Laboratories ( https://polarislabs.com/ ). Funny enough...I just went and bought another round of sample bottles from them and plan on doing...- Land Rover Joe
- Post #5
- Forum: LR4
-
Fuel Gauge Reading Off
Update - Dropped the tank - swapped out both of the sensor units with floats. Cleared the DTC's with the IID Tool and no more codes - fuel gauge reading correctly (first time in like 4 months)! Hurray!- Land Rover Joe
- Post #14
- Forum: LR4
-
Morimoto XB Led Fog Light Install
So giving the in-cabin front fog lamp push switch a double click - toggles the XB Evo+ unit from white light to yellow light - better for poor weather and whatnot. No additional wiring (to include relays) or switching required: the unit mates directly into the OEM harness. The pattern is the...- Land Rover Joe
- Post #16
- Forum: LR4
-
Morimoto XB Led Fog Light Install
The last light setting was white light, so clicking on the Front Fog lights with the standard cabin switch gives us the Morimoto XB white LED as previously described in this thread. That's a really good light for additional white on the road or more light down low. But not so good for foul...- Land Rover Joe
- Post #15
- Forum: LR4
-
Morimoto XB Led Fog Light Install
Thanks to @f1racer328 for the write up! One must always start with the lights on a foul weather day... Standard Lights on - rain and mist at sunset.- Land Rover Joe
- Post #14
- Forum: LR4
-
Morimoto XB Led Fog Light Install
....This is most true, and our friends at Morimoto have taken this to heart with their new product: Land Rover LR4 (10-16) XB Evo+ LED Fog Lights https://www.morimotohid.com/Land-Rover-LR4-10-16-XB-LED-Fog-Lights_2?quantity=1 In their own words, and what attracted me as mentioned above (very...- Land Rover Joe
- Post #13
- Forum: LR4
-
-
Lube Guard Instant Shudder fix - works….RPM fluctuation and trans shudder gone
I would go for a whole fluid and filter change - whether from the shop or on your own (and when you do it yourself you know what you did!) I would say that it is important to do routine preventative maintenance routinely. Period. My experience, and a whole bunch of science, shows that it is...- Land Rover Joe
- Post #15
- Forum: LR4
-
Persistent misfire under load only
So there is a strainer on the fuel sending / low pressure fuel system - highlighted in red. However, what you are really concerned with is the fuel filter itself, which is integrated on the fuel tank seal / cap assembly - which is the white plastic thing behind the sending unit in my photo...- Land Rover Joe
- Post #84
- Forum: LR4
