Search results
-
Q
Tracking down Bolt info (SOLVED)
I'm planning on retrofitting heated seats in my '16 LR4 since the original owner never spec'ed it with them. I looked for a good set of Black LR4 seats that were already wired for it, but ive had no luck this entire year. So I decided to cobble everything together in pieces. So far I've... -
Q
My new LR4 Journey
There's been times when Ive been looking around for parts for my '16 that I've found a yard with a HD LR4... and I've been curious what I'd need to scavange to do the conversion on mine. I'm guessing it'd probably be easier to just body swap, but I'd love to know the actual list of parts needed... -
Q
Electric Oil Pump Control Solenoid on a 2016 3.0l?
Ok, thanks for the info. If I'm able to get easy access to it at my house without a lift... I guess I can check the voltage on the leads to the solenoid plug and see what I can figure out. -
Q
Electric Oil Pump Control Solenoid on a 2016 3.0l?
I bought a new filter cap and tapped it and put a fitting in place for my gauge hose (sadly only 18" long"), so I'm checking at the filter like the tool you linked me before. There's no leaks from the tool, I made sure of that when I was testing the oil pressure. Is there a specific RPM where... -
Q
Electric Oil Pump Control Solenoid on a 2016 3.0l?
So since my last post I went ahead and ordered a new Autel, so I can dig into this more. What I found is that the Solenoid is reading 100.3% until I hit 3900 RPMs, then it jumps to 0. It'll stay at 0 until I drop below about 3700 RPM and then it'll jump back to 100.3% @Rover Range when... -
Q
2011 lr4 cliking noises coming through speakers
Mine does this every once in a while. I've not been able to figure out why. When it does happen... it sounds like someone hid a geiger counter in my dash. -
Q
Crazy to consider new engine in a 2016 LR4?
When buying one of those motors from a dealership, what kind of warranty would it come with? Is there a difference in warranty if installed at the dealership versus purchased by a 3rd party shop and installed by them? -
Q
Electric Oil Pump Control Solenoid on a 2016 3.0l?
Took me a while to get back to this because I discovered my oil pressure gauge wasn't behaving properly and was sticking at a few points, so I ordered another one and it came in today. The results I got were: (Temp was 77F) Idle @ 77F == 30psi 1500 RPM @77F == 38psi 3000 RPM @ 104F == 46psi... -
Q
Electric Oil Pump Control Solenoid on a 2016 3.0l?
I finally got a break from work insanity to dig back into this. I spent about an hour the other day trying to find where exactly I would attach my oil pressure gauge, and I couldn't find anything. Typically I just locate the oil pressure sensor and swap it out with my gauge, but I cant seem to... -
Q
Prepping for SCV6 120k mi service
Thanks for the info, I'll dig around in some Jag forums and see what I can find. Interestingly Ali has the metal pipes with JLR logos without the "-A" in the part number label. Other than from buying direct from a dealership I really have no way to trust what I buy isn't a Chinese knockoff... -
Q
Should I Rebuild?
I don't mind paying a fair price for things. I'm not looking to get the cheapest price, but I'm also not looking to get ripped off. If I can go to the parts counter and get told around $2000, I dont expect the Service Manager to tell me 15 minutes later that parts are going to cost $5000. When... -
Q
Prepping for SCV6 120k mi service
Interesting, If you look at the part numbers in the image, they have an "-A" at the end of the part number, I assume for aluminum. The ones in the photos you posted, LR092992-A and LR090630-A are the part numbers that dealers have told me don't exist. And the non "-A" versions are just the... -
Q
FYI fan relay went bad at 98k
Im in the same boat with my '16. Every manual I've found (and bought) seems to only cover these motors: No love for us SCV6 3.0 guys I guess. -
Q
Showoff Your LR4
Sadly just sitting at my mechanics shop as I figure out getting my chains redone. -
Q
Should I Rebuild?
I found this to be extremely true when I was first investigating what it'd run to get the timing chains on my '16 LR4 done. I called 6 Dealerships... Hunt Valley MD: "Bring the car here, pay us $500 and then we'll then give you an estimate" (I asked if they could give me just a High cost and a... -
Q
Prepping for SCV6 120k mi service
I noticed those in a few SC V8 Jag tear down images/videos, but I wasnt sure if they were actually OEM, or just a much higher quality fake. Some Chinese parts are very convincing and its not like It'd be hard to 3D scan the OEM part which would capture the logos and such (or import the point... -
Q
Replace the VVT Phasers when replacing chains on a '16 LR4
I guess I'm just paranoid having reading so many horror stories, and I'd rather not tempt fate and have to do the job again. Thanks for the tip, I'll add those to my list. Thanks for the video. I already know my shop wont want to rebuild them, and I have a feeling they're not going to want to... -
Q
Electric Oil Pump Control Solenoid on a 2016 3.0l?
Awesome, thanks for the info! I'll get that tested sometime this weekend or next week when I get a chance. -
Q
Replace the VVT Phasers when replacing chains on a '16 LR4
Another question fpr everyone here that knows way more about these engines than me. I'm going to be replacing the chains, guides, etc on my 2016 LR4 (~90k miles). My mechanic that I trust with my Benz, recommended that if we're going to do this job, we might as well replace the VVT Phasers as... -
Q
Electric Oil Pump Control Solenoid on a 2016 3.0l?
Yup, supercharger rebuild is on the list, I'm debating if I want to go ahead and swap the charger pulley with a 58mm one when its being rebuilt. Also planning on all new belts, pulleys, and tensioners, because why not. They have to come off to do the job, might as well bolt new ones back on in... -
Q
Electric Oil Pump Control Solenoid on a 2016 3.0l?
I appreciate the feedback. I'm going to be doing the timing chains in a month or so, so I figured I'd have most of the parts off except for the oil pan and maybe the lower front cover. I wouldn't want to do the job and then have to take everything back off later. I'm a big proponent of "while... -
Q
Electric Oil Pump Control Solenoid on a 2016 3.0l?
Thanks! I just want to make sure I replace the correct part. Because whatever that is... is orders of magnitude out of spec... if the reading is valid. -
Q
Electric Oil Pump Control Solenoid on a 2016 3.0l?
I scanned my vehicle today with my Autel today and I came up with an out of range value for "Electric Oil Pump Control - Solenoid Position" I've looked online, but cant seem to find anything about oil solenoids except for the older 5.0l engines. Even checking land rover parts sites don't... -
Q
Timing Chain parts
I'd appreciate a peek at that spreadsheet as well, if you're willing. -
Q
Need some help from the experts to identify this ticking on a '16 LR4
Thanks for all the information and advice. I've decided to bite the bullet and get the car. After deciding that I'm going to go ahead and get the timing chains down we negotiated and price and I'm now planning out getting that done. However I've stumbled upon a fun conundrum I didn't...
