Search results

  1. M

    P2019A error code

    Have found Bosch upstream O2 sensors at a reasonable price. Plan is to replace those, then see and replace downstream sensors if needed as next step. Thank you SO much for your help!!
  2. M

    P2019A error code

    O2 lambda values for sensor 1 look fine. Short term fuel trim bank 1 seems to show widest fluctuations
  3. M

    P2019A error code

    Still getting the 0% for O2 sensor heated duty cycle bank 1 sensor 2.
  4. M

    P2019A error code

    Could only find sensor 2 output in volts?
  5. M

    P2019A error code

    Kept the revs at 3,000 and desired rail pressure value came on briefly
  6. M

    P2019A error code

    Hey, thanks. Yes engine was warm. Some of readings different from when I tried it yesterday, so figured there may be some variability based on Gap IID connectivity issues etc. Will look for the O2 sensor voltage readings as you suggest. O2 sensors should always be replaced in pairs - right? Any...
  7. M

    P2019A error code

    Last one is fuel trim....... again, not sure what this may be telling me?
  8. M

    P2019A error code

    Some misfire activity......... but nothing obvious when driving?
  9. M

    P2019A error code

    Fuel rail pressure - not sure what this is telling me?
  10. M

    P2019A error code

    Looks like something up with O2 sensor(s).
  11. M

    P2019A error code

    So I used the Gap IID to check out O2 sensor outputs and rail pressure é trim as you suggested. Trying to decode the results:
  12. M

    P2019A error code

    Gap IID arrived today! P219A has returned twice. No other DTC's. Will nose around with it and check the items you suggest. Nice to see MAF air mass numbers same for both sensors. That code has not returned after I replaced one sensor. Awesome little tool!!
  13. M

    Front LCA replacement - ball joint separation

    Guys, thanks for your thoughts. Yes, got a pickle fork just in case! Britpart does a good vid on LCA replacement. They just whacked the knuckle with a hammer to release the ball joint, but prefer to have a back up plan! gather on early range rovers you need to unseat front drive shafts from...
  14. M

    Front LCA replacement - ball joint separation

    2010 LR4 - planning to do front LCA bushings using new LCA's. Just wondering whether separating the ball joint by whacking the steering knuckle with a hammer is a reliable method of separating the ball joint, or should I get a ball joint tool / pickle fork - if so, any thoughts on tool size...
  15. M

    P2019A error code

    Reading the GAP IID FAQ sections on their website................. they state: "Keep in mind that a Land Rover without any fault codes doesn’t exist". :)
  16. M

    P2019A error code

    Thank you! Am pondering GAP IID tool.........how long do I want to keep the car vs. how long till my wife kicks up hell and wants a replacement :)
  17. M

    P2019A error code

    I looked at the GAP IID tool online today. Are you referring to the 'pro' model or the standard model? Pro was I recall over $2k, whereas the standard model at $700 was affordable. Thanks a ton for you your thoughtful response! So Bank 1 is passenger side and bank 2 is drivers side - correct...
  18. M

    P2019A error code

    I wrote it down as P0219A and of course then cleared the code. The OBDI scanner identified it as generic 'manufacture control', whatever that means. I had a P219A before when I was dealing with the MAF, so assumed the same code as they have similar numbers. Now I am not sure, as P0219 is intake...
  19. M

    P2019A error code

    Typo - should be P2019A
  20. M

    P2019A error code

    2010 5.0L, 90k miles. So.........had a few error codes recently for MAF, throttle position etc. Replaced one MAF sensor and MAF codes appear to be resolved. Just did 300 mile error free trip. Now P219A fuel air imbalance has come up. Had this previously along with MAF code. Research indicates...
  21. M

    Air suspension reliability?

    Regarding signs that air springs need replacing? My 2010 (90k miles) dips at the front when doing gentle bumper to bumper start-stopping in traffic. The front pops right up again, with no bouncing oscillations as per normal shock signs of wear. Owned it for 4yrs - can't remember if it has always...
  22. M

    Water pump replaced, still leaking coolant

    When the garage did the water pump I questioned whether to do thermostat too. They said don't bother. Will bear in mind if leak returns
  23. M

    Water pump replaced, still leaking coolant

    Success! I had only partially reconnected the MAP sensor plug. Clicked it on whole way and CEL gone.... hopefully not to reappear
  24. M

    Water pump replaced, still leaking coolant

    Hhhhmmm....... did clean the inside of the throttle body. Its funny though, only P0106 manifold absolute before I fixed the coolant leak. Now P0069, P0208 and P0106 all manifold pressure related, plus the TPS error code. Codes triggered as soon as I started the car. Will double check MAP sensor...
  25. M

    Water pump replaced, still leaking coolant

    Yes there is a MAP sensor. I believe I plugged it back in. If code returns will double check its connected properly. Was having MAF codes before coolant leak. Initially came on then disappeared on its own a day later. Went on like this for a couple of months before becoming more persistent...

Latest posts

Members online

No members online now.
Total: 1,372 (members: 0, guests: 1,372)

Forum statistics

Threads
37,146
Posts
226,329
Members
31,263
Latest member
KyleK951

Share this page

Top