Check that the air lines are in the correct positions.
Slightly loosen the air hose that goes to air reservoir. Let the vehicle drop.
Retighten the air hose. Close all the doors and start the vehicle.
See if it reacts normally.
We have a scrapped LR4 here.
I pulled the driver's door panel off.
Unfortunately, it is pre wired like yours. No LED light.
Lock button and ambient LED lights are not connected.
I would set the suspension on off road height.
Disconnect the battery and let the vehicle sit overnight. See if the suspension drops.
This rule out the electrical side of things.
On the Service Action,
D041v4
Has been update to include an inspection of the front knuckle part numbers.
Mandatory knuckle replacement for the ones that fall under the specified part number.
One way to verify if it is the front control arm, rear position bushing. Is to:
Drive about 10mph, let off the accelerator, rapidly apply and release the brake ped- several times. Clunking noise will be prominent.
2 SPD TRANS CASE WITH CTL TRAC
7 SEAT CONFIGURATION
19X8 SPLT 7SPKE STY D SPKL SIL
255/55 R19 A/S TYRE
3240 KG GVM
AMBIENT LIGHTING
ANALOGUE AUDIO BROADCAST
APPROACH LIGHTS
ATC AIR CONDITIONING
AUTO HEADLAMPS-FOLLOW ME HOME
AUTOMATIC HEADLAMP LEVELLING
BADGE-LR 4 SALES
BUMPER APERTURE -ATLAS...
There are a couple TSBs related to the compressors.
If the original compressor was a an AMK, no reflash is required.
Replacing the Hitachi with the AMK requires the reflash.
The Hitachi compressors are no longer available. So you have to get the AMK replacement kit. Comes with all the hoses...
Usually, the elbows in the front drains would dry rot and fall apart. Hence the water inside the vehicle.
You can use a VOLVO part, which is just the elbow.
VOLVO part # 30753148
Also. Make sure the windshield wiper cowl is firmly sealed against the windshield.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.