Search results

  1. davez26

    rear hatch hydraulic cylinders

    I had the body side ones checked as per the TSB, and after 9 mths or so noted that the hatch side was loose. I pulled both sides, loctite and should be a done deal. This was like 9 mths back again. Still going strong. (note-do one side @ a time or wear a helmet.:smile: ) To be honest though...
  2. davez26

    Different suspension tuning for HSE & SE?

    A.c.e. Active Cornering Enhancement. I think it was 99-2002 Discoveries.
  3. davez26

    Chipped windshield

    A windshield is really two sheets of glass with a sheet of plastic bonded in between. That plastic has the lines on it. They use some kind of black magic to make all of this adhere togehter and I hope to one day see something on the Discovery Channel to see them put one together. Anyway, your...
  4. davez26

    Different suspension tuning for HSE & SE?

    richpike - go to the head of the class. richpike: Correct, I just didn't flesh that out. The ultimate key here is that the software is alike between SE and HSE. "Monitors the road surface and constantly adjusts to it" is the way the Marketing people put the spin on something so relatively...
  5. davez26

    LR3 battery choices for 2005 HSE

    Replacement batteries are the Interstate MTP-H8. Interstate has been the authorized replacement battery for Land Rover product since I can remember. Get it from Firestone, Interstate, or even your dealer! Pricing is all over the place on batteries lately. Don't go cheap on these! The car takes...
  6. davez26

    Removing Door Moldings/Trim?

    Held on w/ double sided tape. Unless there is shoddy paint underneath, a good bit of floss, followed by goof-off and then wax and polsih for good measure and you should be done. LR pulled these form sale about 6 mths back, due to adhesive failures. Myabe if you wait long enough, they will...
  7. davez26

    Towing a uhaul trailer. What do I need?

    The harness has the 4-flat plug that is common on most trailers, so yo should be set there. If you have the receiver, you are getting warmer. What you may not have is the drawbar, the male piece with the ball on the end that the trailer actually attaches to. You could by one from the LR store...
  8. davez26

    LR3 Keyless

    Remotes are sealed and waterproof to I think like 50 feet. We tried to open one and pretty much had to destroy it. Still, sounds like a remote problem, but not sure how to fix...
  9. davez26

    LR3 bumper guard

    That particular guard has two designs, one has holes throught the front and then through the bumper cover and through the bar. Second design mounts with a bracket @ top and bottom on the cover top. Either way, there will be some holes. Directions for both are found @ www.ownerinfo.landrover.com...
  10. davez26

    Never Coming Back Again

    You are correct. You should have. Then you shold have kicked the sh*t out of your so called friend who knew the car had an issue and decided it would be cool to loan it to you knowing it had a problem. If they would have taken it in and had it corrected before the hand over this would have all...
  11. davez26

    rear light guards

    I've got a set with the template in it. I can fax it or scan it tonight for E-mail. Fax #?
  12. davez26

    Recall Notice

    Safety Recall P045 - Rotary Coupler Wiring Fracture AFFECTED VEHICLES A total of 37,117 vehicles in the USA are involved in this Recall action. LR3 (LA) VIN: 5A309377 - 6A376425 Model Year: 2005 - 2006 Range Rover Sport (LS) VIN: 6A900290 - 6A939919 Model Year: 2006 DESCRIPTION OF DEFECT...
  13. davez26

    Rear wheel well taper

    Actually the meaning I intended was: Don't do the tires. NOT doing the BFG's is not the best option. I Love those tires and never have regretted them. I highly reccommend them. A near choice is the General Grabber AT2. It is available in the stock tire size, and has a very similiar tread to...
  14. davez26

    Recall Notice

    P045 relates to the rotary coupler (under the airbag) on RRS and LR3, should take like 1/2 hour to do. DUE to a failure to a safety system, this is a recall, meaning it is mandated by the NHTSA. Q041 applies to all 03-05 Full-Size RR and is a pinion coupler and driveshaft replacement. This is...
  15. davez26

    Rear wheel well taper

    There are entire threads on this, but the short answer, is the shape is to cover the rear A/C lines for cars so equipped. With that size, you should have no rubbing in the front in any condition, and you will have rubbing in the back on the bump in the place you mentioned, but only in an...
  16. davez26

    Rear Hatch Squeaking

    Something to check is the ball mounts for the upper gate struts. They just thread into the upper part of the quarter panel. If they are loose, they can generate a noise. If they are loose and you remove the strut, get a helper and do one side at a time, and use loctite to prevent in the future.
  17. davez26

    Lr3 2005

    Manuals for this car have always been in electronic format. They require a subscription to view. Manuals are here, (click on technical information). manuals . Most peolpe get a subscription for a short time and print out what they need. Good luck with that project.
  18. davez26

    LR3's "Land Rover" hood letters same as 2004 Discovery II ?

    You could, but I prefer you deal with your locals unless they are totally bad. I'm more on the board to soak up knowledge and help out where I can than to drum up business.
  19. davez26

    LR3's "Land Rover" hood letters same as 2004 Discovery II ?

    Did Trek in 2003. The hardest day I ever had, but a bunch of fun. I'm letting some younger up and comers take the day for this event, but if one can't make it, I'm going. Thanks for your commnets. I think what makes or breaks a dealer is if they have the passion, or if they are going in to...
  20. davez26

    LR3's "Land Rover" hood letters same as 2004 Discovery II ?

    So you got me interested and I went to the bin to check it out. Both of these come on flat cardboard sheets, with film on the fronts. The film keeps the letters in the proper spacing until they are set down. You pull the backing, lay it down on the car, and when you have it correct, you press...
  21. davez26

    Heavy Duty Package

    One way to tell is to crawl under an look, but it is not easy. A locking diff will have a motor and harness on top toward the rear of the unit while an open one will not. If you search this forum for "locker", there is a thread fairly recently called "retrofit rear end" that has a link to Ebay...
  22. davez26

    How to reset the oil change message?

    That's the method I use.
  23. davez26

    Just noticed a new HSE tire at Tire Rack

    One of our customers has these on his full-size and he likes them alot. Quiet and good grip. We took a group to Great Sand Dunes NP, here in Colorado and he was very happy with them on-road, off-road and in the sand. No long-term results just yet.
  24. davez26

    Transmission jerking?

    GGS masks it becuase it starts out in second gear. If you sit with the car running in Drive and swith to GGS, you will feel a bump, and when you swith it back, it will bump again. At least in my car.

Latest posts

Members online

Forum statistics

Threads
36,719
Posts
222,737
Members
30,890
Latest member
Besi
Top