Search results
-
M
Weak Brakes
Not that I am a brake guru, but I had the same problem. I was bleeding my brakes to get better pedal and my son pushed down a little to hard and the master cylinder gave out. I would do what Mike says and flush the lines its cheaper. If the master cylinder is going out it most likely is letting... -
M
random missfire
#3 is 124 #5 is 126 #7 is 125 #2 is 1241/2 #4 is 125 #8 is 125 They are pretty darn close. has 145,000 on it I want to do a head job later after I get the smog and it cools off in the fall. -
M
random missfire
Thanks Mike. I have a more comprehensive in put for you that may give you more insight into the working of my Discovery 2. I lost the last post I made??? so I have attached a word doc with the scanner results on it. You asked about the plug wires they are 7mm high heat resistance. vacuum... -
M
random missfire
Not sure of the wire size. they were replaced by the previous owner from what he said just before he sold it to me a month ago. I get P0300 once in a while and P0301 every time. I replaced the before O2 sensor and got that code to clear. I pushed a black split wire smurf tube (wire harness... -
M
random missfire
random missfire and coil refit I keep getting a random miss fire code and miss fire on cylinder 1, on my 02 discovery. Ive changed the O2 sensors, new plugs, wires are good, checked vacuum running 18.5 pounds, the scanner is showing 19.5 to 20.5 which is telling me the computer is running... -
M
Mastercylinder Help 98 Disco ABS
brake problems this takes two people. if you are replacing the master cylinder and the ABS was previously installed prior to replacing the master cylinder you will not need the dealers expensive bleeder tool. First run down to your local Harbor Freight and buy a vacuum tester/ break bleeding...
