Search results

  1. basstard440

    thermostat?

    2000 disco 4.0 115k. I was wondering if this sounds like a stat problem. It started off like this, at full temp while running it blew the top hose off the top of the stat housing. I chalked it up to that I did something stupid like not tightening the clamp when I replaced it oh so many months...
  2. basstard440

    terminal diagram

    oops sorry, 2000 disco petro. I have rave but there is no diagram. I am going to build one cuz i cant bring myself to buy a wire that has a core charge on it. thanks
  3. basstard440

    terminal diagram

    Can anyone point me in the direction or post a picture of the battery and starter terminal diagram? Thank you, Joe
  4. basstard440

    P0103 P1884 p1590

    Thanks Mike. He wants 100 for it. he says that it is a part he bought from rover for a rover he no longer has and the 2 part numbers are for the housing and the maf. Im going to give it a shot, the part is a day away and he is picking up the shipping. Thanks again Mike and Greg. I'll post the...
  5. basstard440

    P0103 P1884 p1590

    it has 2 numbers. Err7171 and 0280.217.532 is this a real rover part or a junker?
  6. basstard440

    P0103 P1884 p1590

    I found one cheap. They are claiming it is oem. Does any one have a part number so I can compare it to this one?
  7. basstard440

    P0103 P1884 p1590

    I just found an OEM for a buck 25 Now thats cheap. far cry from the stealership. But I still don't want to drop a bean and a quarter on a "I think it might be a" so I'm going to wait for some rover know it alls to say hey stupid. It's the blablabla, dumb newbie. hahaha Thanks Joe
  8. basstard440

    P0103 P1884 p1590

    Oh, I just noticed that you have a d1. disregard everything above except the disconnecting MAF's
  9. basstard440

    P0103 P1884 p1590

    Well Greg, You know the chances of finding a good used maf. I have read some post of your saying you have successfully cleaned many maf's so I thought i would give it a shot. I just got in from disconnecting the mafs from 2 of my other vehicles and they both died so I think "(think)" that it may...
  10. basstard440

    P0103 P1884 p1590

    Nope, recleaning did nothing. Started with no problem ran for about 30 secs and shut off. Restarted it, it ran rough with SEL on.
  11. basstard440

    tranny knocking

    OOps never followed up with this. It was a cracked flex plate.
  12. basstard440

    P0103 P1884 p1590

    00 dII 100k. Service engine light came on at start. Stalled at idle. Read about the air box and no air filter at all. I put new filter in and cleaned MAF. Cleared the codes and let sit 5 minutes. Still same problem, p0103 and p1884 and stalling (no p1590 code this time). I just cleaned the MAF...
  13. basstard440

    Understanding and Fixing the 3 Amigos

    This is an Awesome tutorial. Thanks for sharing Disco Mike! Mike would your friend allow that to be directly posted here? If so it should be and stickied. This should be a sticky! JMO
  14. basstard440

    Doors off

    Bahhh, You get scratched up anyway. At least I do, with getting out and spotting and eventually diving out of the way, and my winch cable always seems to bite me through the gloves. Oh well, to each is own. Did you see that? I'm trying to justify getting whipped by branches lol.
  15. basstard440

    If you were wondering about Jeeps

    How does my Disco measure up to the Jeep Rubicon? I often wondered this very question. Well it was my pleasure to do some wheeling with my cousin who just got one a few months ago. The Rubi is a very nice off roader, Locker, 32" BF's, electric stabilizer releases and Tera Low. I love the Tera...
  16. basstard440

    Doors off

    How come Nobody told me the doors come off these things? I was poking around shooting the hinges with grease when it dawned on me that they were on with just clips. So, curious me popped the clips, pulled the pins and unplugged the wires and Jumpin Jeabus it started and ran without a hitch. I...
  17. basstard440

    Knocking sound when speening up.

    I wonder if it is a bad cat. Bang around on the cats and see if it rattles.
  18. basstard440

    tranny knocking

    Thanks, I will check that out tomarrow and post.
  19. basstard440

    tranny knocking

    see thats what I'm thinking. A bad flex or a loose TC bolt. I was under it today and can't find access to the bolts. Do I have to pull the starter out? I pulled the 2 grommets from the front and the access from the bottom and rotated the flywheel and Im not seeing the bolts.
  20. basstard440

    tranny knocking

    I am not positive and I did go under and listen to it with a poor mans stethoscope. It dose sound as if it is coming from the bell area. I listened to the oil pan and the knock sounds residual, same with the pan on the trans, residual. At the bell it is pronounced. Whats getting me is that the...
  21. basstard440

    tranny knocking

    2000 disco 90somtin k mi. petro automatic. I hear a knock coming from the tranny in park. In gear it sounds fine. recently I had a motor put in and suspect something loose (crossing fingers) so I take it back to him and he calls me back to tell me how much a trans is with labor. What would make...
  22. basstard440

    lockers

    Is this for off road only? If not, welding would be a bad idea. Personally I would save my money and get a locker that you can disengage when not needed. An auto locker will kill things, a weld or spool will kill things fast.
  23. basstard440

    Center Diff Lock?

    My 2000 only shows the mentioned 3. If you are afraid to weld (like me) you can build the lever and bolt it on with a nylon nut. You should climb underneath it and feel around to see if the previous owners installed a cdl.
  24. basstard440

    discovery 2002

    They are expensive. If your handy you can make your own. There are a bunch of home made cdl's on the web. But to answer your question they are not hard to install.
  25. basstard440

    Sluggish Wipers

    A motor could do that? Just take a minute to warm up? I did not know that. I've seen them slow or stop but never delayed.

Latest posts

Members online

Total: 553 (members: 5, guests: 548)

Forum statistics

Threads
36,718
Posts
222,734
Members
30,890
Latest member
Besi

Share this page

Top